[Sun Jul 14 20:42:50 2013] Detection parameters:
  Position = (260.8, 258.6) = 2 11 48.01 -40 20 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1196.0 +/- 41.2
  Background counts = 27.2
  Rate = 0.08 +/- 0.003

[Sun Jul 14 20:42:52 2013] Off-axis axis estimate = 3.97'
[Sun Jul 14 20:43:16 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:16 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sun Jul 14 20:43:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.886
[Sun Jul 14 20:43:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.42"
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1.csv
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1.csv
[Sun Jul 14 20:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 14 20:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:31 2013] Warning, spatial fit 1 centroid is now closest to src. 45
[Sun Jul 14 20:43:31 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:43:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:43:31 2013] Assessing source extent using major
[Sun Jul 14 20:43:31 2013] Source does appear to be extended
[Sun Jul 14 20:43:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 20:43:53 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:53 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sun Jul 14 20:43:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.886
[Sun Jul 14 20:43:53 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.42"
[Sun Jul 14 20:43:53 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 14 20:43:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1.csv
[Sun Jul 14 20:43:53 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 14 20:43:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1.csv
[Sun Jul 14 20:43:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:54 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 14 20:43:54 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 14 20:43:54 2013] Fit fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 14 20:44:06 2013] Spatial fit model total counts = 1492.370000, observed total counts = 1361.000000
[Sun Jul 14 20:44:06 2013] Offset between fit and detection position for source 1 = 0.194811 pixels
[Sun Jul 14 20:44:06 2013] 1469.828000 total counts/ 594.361000 bgd. counts: snr = 35.909936
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.194811 pixels
  Position = (260.8, 258.8) = 2 11 48.00 -40 20 42.8
  Extent = 5.3 (4.9-5.6)", rotation angle = 0
  Source counts = 875.5 +/- 38.3
  Background counts = 594.4
  Rate = 0.03 +/- 0.002
[Sun Jul 14 20:44:06 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:44:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:44:06 2013] Assessing source extent using major axis lower bound
[Sun Jul 14 20:44:06 2013] Source does appear to be extended
[Sun Jul 14 20:44:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 20:44:25 2013] XMMSAS src. selection expression = ellipse(22642.401600, 22469.746840, 315.125409, 315.125409, 0.000000, X, Y)
[Sun Jul 14 20:44:25 2013] Not overwriting source region fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 14 20:44:25 2013] Extracting stamp from image fullrun_pn_xmm0201900601_pi300-10000_cl_sm2.00.img.gz, (243, 241) - (279, 277)
[Sun Jul 14 20:44:25 2013] XMMSAS bgd. selection expression = annulus(22642.401600, 22469.746840, 525.209015, 1050.418030, X, Y) && !ellipse(22488.838318, 21796.500931, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 20:44:25 2013] Writing fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1.gif
[Sun Jul 14 20:44:27 2013] ../../xmm0201900601/products/events/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0201900601/products/events/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Jul 14 20:44:27 2013] Mean detx,y = (-1828.36, 6164.62) 
[Sun Jul 14 20:44:27 2013] ../../xmm0201900601/products/images/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src.img and ../../xmm0201900601/products/images/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Jul 14 20:44:27 2013] ../../xmm0201900601/products/spectra/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0201900601/products/spectra/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Jul 14 20:44:27 2013] Setting source spectrum file to fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 14 20:44:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 14 20:44:27 2013] ../../xmm0201900601/products/lightcurves/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0201900601/products/lightcurves/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Jul 14 23:03:33 2013] Updating aperture counts using extracted products
[Sun Jul 14 23:03:33 2013] Total counts from fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 955.00
[Sun Jul 14 23:03:33 2013] Total counts from fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 221.00
[Sun Jul 14 23:03:33 2013] Got source and background scale factors 285539.000000, 1414026.000000
[Sun Jul 14 23:03:33 2013] User source parameters:
  Position = (260.8, 258.8) = 2 11 48.00 -40 20 42.8
  Extent = 5.3 (4.9-5.6)", rotation angle = 0
  Source aperture counts = 910.4 +/- 31.9
  Background aperture counts = 44.6
  Rate = 0.04 +/- 0.001

[Sun Jul 14 23:03:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 23:03:39 2013] Using photon index=1.80, rate=0.0348, arf fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1.arf
[Sun Jul 14 23:03:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 23:03:39 2013] Updating source flux to 1.5e-13
[Sun Jul 14 23:03:59 2013] xmm0201900601/analysis//spectral/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete