[Sun Jul 14 20:42:55 2013] Detection parameters:
  Position = (353.5, 117.8) = 2 11 12.67 -40 30 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.7 +/- 8.0
  Background counts = 6.4
  Rate = 0.001 +/- 0.0003

[Sun Jul 14 20:42:55 2013] Off-axis axis estimate = 13.69'
[Sun Jul 14 20:43:20 2013] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 14 20:43:20 2013] Initial guess for spatial extent in simple fitting = 13.28"
[Sun Jul 14 20:43:20 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.971
[Sun Jul 14 20:43:20 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 13.28"
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jul 14 20:43:21 2013] Fit fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src37 appears to have run properly
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jul 14 20:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jul 14 20:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jul 14 20:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:43 2013] Spatial fit model total counts = 123.283000, observed total counts = 116.000000
[Sun Jul 14 20:43:43 2013] Offset between fit and detection position for source 39 = 0.137714 pixels
[Sun Jul 14 20:43:43 2013] 121.718100 total counts/ 106.025000 bgd. counts: snr = 1.524069
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.137714 pixels
  Position = (353.4, 117.8) = 2 11 12.72 -40 30 56.2
  Extent = 3.4" x 2.8", rotation angle = 349
  Source counts = 15.7 +/- 11.0
  Background counts = 106.0
  Rate = 0.0005 +/- 0.0004
  Deleting source due to low Poisson probability