[Sun Jul 14 20:42:54 2013] Detection parameters:
  Position = (327.1, 297.7) = 2 11 22.78 -40 17 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.3 +/- 20.8
  Background counts = 19.6
  Rate = 0.009 +/- 0.0008

[Sun Jul 14 20:42:55 2013] Off-axis axis estimate = 2.08'
[Sun Jul 14 20:43:20 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:20 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Jul 14 20:43:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.763
[Sun Jul 14 20:43:20 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.47"
[Sun Jul 14 20:43:20 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 14 20:43:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3.csv
[Sun Jul 14 20:43:20 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 14 20:43:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3.csv
[Sun Jul 14 20:43:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 14 20:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 14 20:43:21 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 14 20:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 14 20:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:43 2013] Warning, spatial fit 3 centroid is now closest to src. 33
[Sun Jul 14 20:43:43 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:43:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:43:43 2013] Assessing source extent using major
[Sun Jul 14 20:43:43 2013] Source does appear to be extended
[Sun Jul 14 20:43:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 20:43:43 2013] Source is confused with source 7
[Sun Jul 14 20:43:56 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:56 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Jul 14 20:43:56 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.763
[Sun Jul 14 20:43:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.47"
[Sun Jul 14 20:43:57 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 14 20:43:57 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 14 20:43:57 2013] Fit fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jul 14 20:43:57 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 14 20:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 14 20:43:57 2013] fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 14 20:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 14 20:43:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:44:16 2013] Warning, spatial fit 3 centroid is now closest to src. 33
[Sun Jul 14 20:44:16 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:44:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:44:16 2013] Assessing source extent using major
[Sun Jul 14 20:44:16 2013] Source does appear to be extended
[Sun Jul 14 20:44:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 23:03:11 2013] XMMSAS src. selection expression = ellipse(28408.645630, 25855.463257, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 23:03:11 2013] Not overwriting source region fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src.reg
[Sun Jul 14 23:03:11 2013] Extracting stamp from image fullrun_mos2_xmm0201900601_pi300-10000_cl_sm2.00.img.gz, (290, 260) - (365, 335)
[Sun Jul 14 23:03:11 2013] XMMSAS bgd. selection expression = annulus(28408.645630, 25855.463257, 1087.500000, 2175.000000, X, Y) && !ellipse(27963.575104, 26408.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28812.772254, 26030.634615, 2091.208060, 2091.208060, 0.000000, X, Y) && !ellipse(26675.893860, 26309.606018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.982000, 26958.966000, 1143.064033, 1143.064033, 0.000000, X, Y) && !ellipse(29677.466000, 25103.176000, 1254.984036, 1254.984036, 0.000000, X, Y) && !ellipse(26056.664032, 26398.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29592.926758, 25973.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29444.984000, 26908.406000, 1196.008034, 1196.008034, 1.274900, X, Y) && !ellipse(25570.329041, 26135.866211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25786.554626, 27369.945068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28839.902039, 28039.548767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.273254, 24512.634399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26570.011292, 24856.896118, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 23:03:11 2013] Writing fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10.gif
[Sun Jul 14 23:03:12 2013] ../../xmm0201900601/products/events/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0201900601/products/events/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Jul 14 23:03:12 2013] Mean detx,y = (-753.38, -221.08) 
[Sun Jul 14 23:03:12 2013] ../../xmm0201900601/products/images/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src.img and ../../xmm0201900601/products/images/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Jul 14 23:03:12 2013] ../../xmm0201900601/products/spectra/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0201900601/products/spectra/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Jul 14 23:03:12 2013] Setting source spectrum file to fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jul 14 23:03:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jul 14 23:03:12 2013] ../../xmm0201900601/products/lightcurves/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0201900601/products/lightcurves/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Jul 14 23:03:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 23:03:15 2013] rmf not generated due to insufficient counts
[Sun Jul 14 23:03:15 2013] fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Jul 14 23:03:44 2013] Updating aperture counts using extracted products
[Sun Jul 14 23:03:44 2013] Total counts from fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 1052.00
[Sun Jul 14 23:03:44 2013] Total counts from fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 33.00
[Sun Jul 14 23:03:44 2013] Got source and background scale factors 1173780.000000, 255180.000000
[Sun Jul 14 23:03:44 2013] User source parameters:
  Position = (327.1, 297.7) = 2 11 22.78 -40 17 51.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 900.2 +/- 33.4
  Background aperture counts = 151.8
  Rate = 0.03 +/- 0.001

[Sun Jul 14 23:03:44 2013] Updating counts from extracted products
[Sun Jul 14 23:03:44 2013] Set source signif. to 900.21/12.32 = 73.07
[Sun Jul 14 23:03:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 23:03:47 2013] Using photon index=1.80, rate=0.0309, arf fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10.arf
[Sun Jul 14 23:03:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 23:03:47 2013] Updating source flux to 3e-13
[Sun Jul 14 23:03:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 23:03:56 2013] xmm0201900601/analysis//spectral/fullrun_mos2_xmm0201900601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete