[Sun Dec 18 15:08:04 2011] Detection parameters:
  Position = (323.2, 310.0) = 0 49 23.13 -29 31 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1112.1 +/- 44.9
  Background counts = 106.1
  Rate = 0.03 +/- 0.001

[Sun Dec 18 15:08:05 2011] Off-axis axis estimate = 1.98'
[Sun Dec 18 17:09:55 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 17:09:55 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Dec 18 17:09:55 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Sun Dec 18 17:09:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Sun Dec 18 17:45:44 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 17:45:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 17:45:44 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 17:45:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 17:45:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 17:45:45 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 17:45:45 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 17:45:45 2011] Fit fullrun_mos2_xmm0201900401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 17:45:55 2011] Spatial fit model total counts = 3474.000000, observed total counts = 3474.000000
[Sun Dec 18 17:45:55 2011] Offset between fit and detection position for source 1 = 0.116626 pixels
[Sun Dec 18 17:45:55 2011] 3455.300000 total counts/ 2209.710000 bgd. counts: snr = 26.497657
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116626 pixels
  Position = (323.3, 310.1) = 0 49 23.11 -29 31 13.4
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 1245.6 +/- 58.8
  Background counts = 2209.7
  Rate = 0.05 +/- 0.002
[Sun Dec 18 17:45:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 17:45:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 17:45:55 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 17:45:55 2011] Source does appear to be extended
[Sun Dec 18 17:45:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 17:45:55 2011] Source is confused with source 2
[Sun Dec 18 19:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 19:34:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 19:34:19 2011] Initial guess for spatial extent in simple fitting = 14.84"
[Sun Dec 18 19:34:19 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.046
[Sun Dec 18 19:34:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.84"
[Sun Dec 18 20:19:58 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 20:19:58 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 20:19:58 2011] Fit fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Dec 18 20:19:58 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 20:19:58 2011] fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 20:19:58 2011] Fit fullrun_mos2_xmm0201900401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 20:20:10 2011] Warning, spatial fit 1 centroid is now closest to src. 16
[Sun Dec 18 20:20:10 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 20:20:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 20:20:10 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 20:20:10 2011] Source does appear to be extended
[Sun Dec 18 20:20:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 23:15:25 2011] Counts = 1245.590000, rescaling region sizes by 2.000000
[Sun Dec 18 23:15:25 2011] XMMSAS src. selection expression = ellipse(28080.872200, 26929.779800, 1781.040051, 1781.040051, 0.000000, X, Y)
[Sun Dec 18 23:15:25 2011] Writing source region out to fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 23:15:25 2011] Extracting stamp from image fullrun_mos2_xmm0201900401_pi300-10000_cl_sm2.00.img.gz, (221, 208) - (426, 412)
[Sun Dec 18 23:15:25 2011] XMMSAS bgd. selection expression = annulus(28080.872200, 26929.779800, 5936.800171, 11873.600342, X, Y) && !ellipse(28196.448000, 27068.308000, 1917.096055, 1917.096055, 0.000000, X, Y) && !ellipse(22343.659400, 15439.578400, 478.502760, 478.502760, 0.000000, X, Y) && !ellipse(32413.903351, 15456.180786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28453.576691, 25951.216888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28353.827400, 25567.454000, 816.240023, 816.240023, 0.000000, X, Y) && !ellipse(34489.584050, 28371.954000, 390.499211, 390.499211, 0.000000, X, Y) && !ellipse(29281.398895, 27150.520172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36758.688873, 22578.578308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39497.009094, 21162.965805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.680542, 25527.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27300.750000, 20313.703800, 292.004008, 292.004008, 0.000000, X, Y) && !ellipse(26510.522000, 25068.964000, 1095.072032, 1095.072032, 0.000000, X, Y) && !ellipse(27696.075592, 32011.167267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31084.490000, 17122.161200, 1694.600049, 1694.600049, 0.000000, X, Y) && !ellipse(26827.048000, 27079.486000, 1125.176032, 1125.176032, 0.000000, X, Y) && !ellipse(28009.377800, 28203.076000, 1264.848036, 1264.848036, 0.000000, X, Y)
[Sun Dec 18 23:15:25 2011] Writing fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 23:15:29 2011] Mean detx,y = (59.39, 451.73) 
[Sun Dec 18 23:15:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 23:19:58 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 23:19:59 2011] Setting source spectrum file to fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 23:19:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 00:33:21 2011] Updating aperture counts using extracted products
[Mon Dec 19 00:33:21 2011] Error reading totcts from fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 00:33:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 00:33:22 2011] Using photon index=1.80, rate=0.0513, arf fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 00:33:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 00:33:22 2011] Updating source flux to 4.4e-13
[Mon Dec 19 00:33:55 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Dec 19 00:34:54 2011] Reading fit data from xmm0201900401/analysis//spectral/fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 00:34:54 2011] Spectral fit parameter nH value = 8.53062e+20
[Mon Dec 19 00:34:54 2011] Spectral fit parameter PhoIndex value = 2.14907
[Mon Dec 19 00:34:54 2011] Failed to get F(0.3-8.0) from xmm0201900401/analysis//spectral/fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 00:34:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 00:34:54 2011] Using Nh = 8.5e+20, photon index=2.15, rate=0.0513, arf fullrun_mos2_xmm0201900401_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 00:34:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 00:34:54 2011] Updating source flux to 4.1e-13