[Fri Mar 30 10:19:37 2012] Detection parameters:
  Position = (277.2, 289.0) = 0 20 42.94 -25 42 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1164.8 +/- 45.5
  Background counts = 95.8
  Rate = 0.04 +/- 0.002

[Fri Mar 30 10:19:40 2012] Off-axis axis estimate = 1.69'
[Fri Mar 30 14:14:47 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 14:14:47 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Mar 30 14:14:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Mar 30 14:14:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.27"
[Fri Mar 30 16:34:30 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Mar 30 16:34:30 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Mar 30 16:34:30 2012] Fit fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Mar 30 16:34:30 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Mar 30 16:34:30 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Mar 30 16:34:30 2012] Fit fullrun_mos2_xmm0201900301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Mar 30 16:35:05 2012] Spatial fit model total counts = 3604.200000, observed total counts = 3343.000000
[Fri Mar 30 16:35:05 2012] Offset between fit and detection position for source 3 = 1.019462 pixels
[Fri Mar 30 16:35:05 2012] 3608.247000 total counts/ 2958.170000 bgd. counts: snr = 11.952348
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.019462 pixels
  Position = (277.6, 290.0) = 0 20 42.82 -25 42 23.3
  Extent = 14.5 (14.4-29.1)", rotation angle = 0
  Source counts = 650.1 +/- 60.1
  Background counts = 2958.2
  Rate = 0.03 +/- 0.003
[Fri Mar 30 16:35:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 16:35:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 16:35:05 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 16:35:05 2012] Source does appear to be extended
[Fri Mar 30 16:35:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 16:35:05 2012] Source is confused with source 28
[Fri Mar 30 19:53:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 19:53:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 19:53:52 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Fri Mar 30 19:53:52 2012] source mask rpix=3.3, npix_max = 59, mask sum = 52, frac = 0.880
[Fri Mar 30 19:53:52 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.54"
[Fri Mar 30 22:39:00 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar 30 22:39:00 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar 30 22:39:00 2012] Fit fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Mar 30 22:39:00 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar 30 22:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Mar 30 22:39:00 2012] fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar 30 22:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Mar 30 22:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 22:39:35 2012] Warning, spatial fit 2 centroid is now closest to src. 30
[Fri Mar 30 22:39:35 2012] Spatial fit model total counts = 1864.510000, observed total counts = 1627.000000
[Fri Mar 30 22:39:35 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 22:39:35 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 22:39:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 22:39:35 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 22:39:35 2012] Source does appear to be extended
[Fri Mar 30 22:39:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 04:41:05 2012] XMMSAS src. selection expression = ellipse(24098.523000, 25178.857180, 872.544025, 872.544025, 0.000000, X, Y)
[Sat Mar 31 04:41:05 2012] Writing source region out to fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar 31 04:41:05 2012] Extracting stamp from image fullrun_mos2_xmm0201900301_pi300-10000_cl_sm2.00.img.gz, (227, 240) - (328, 340)
[Sat Mar 31 04:41:05 2012] XMMSAS bgd. selection expression = annulus(24098.523000, 25178.857180, 1454.240042, 2908.480084, X, Y) && !ellipse(22407.959380, 25126.004200, 366.718411, 366.718411, 0.000000, X, Y) && !ellipse(24929.716000, 23912.678000, 1197.648034, 1197.648034, 0.000000, X, Y) && !ellipse(24704.213200, 23398.962000, 1576.000045, 1576.000045, 0.000000, X, Y) && !ellipse(23718.987732, 25986.810211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23549.928741, 23726.947510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23311.037170, 25206.595337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25496.912170, 23414.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23017.236140, 28190.643400, 301.426409, 301.426409, 0.000000, X, Y) && !ellipse(24839.243600, 22748.382000, 2392.112069, 1141.720033, 32.712600, X, Y) && !ellipse(24602.167297, 26716.303406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.043152, 25779.380737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22691.061279, 24399.434570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22550.214630, 23630.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23755.133301, 26906.337128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25921.002655, 25777.200958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21927.476181, 24562.830383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25080.704000, 26037.452000, 1072.096031, 1072.096031, 0.000000, X, Y) && !ellipse(22474.591431, 26280.275909, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 04:41:05 2012] Writing fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3.gif
[Sat Mar 31 04:41:29 2012] Mean detx,y = (17.08, -127.20) 
[Sat Mar 31 04:41:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:41:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:41:41 2012] Setting source spectrum file to fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 31 04:41:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 31 05:59:19 2012] Updating aperture counts using extracted products
[Sat Mar 31 05:59:20 2012] Error reading totcts from fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 31 05:59:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 05:59:21 2012] Using photon index=1.80, rate=0.0309, arf fullrun_mos2_xmm0201900301_pi300-10000_pass1_cl_src3.arf
[Sat Mar 31 05:59:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 05:59:21 2012] Updating source flux to 3.2e-13
[Sat Mar 31 06:01:06 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat Mar 31 06:01:06 2012] Flag c found in src. 3 procflags, skipping spectral fitting