[Tue Jul  3 12:34:43 2012] Detection parameters:
  Position = (239.2, 265.1) = 14 13 33.56 -3 16 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.6 +/- 7.4
  Background counts = 8.4
  Rate = 0.002 +/- 0.0006

[Tue Jul  3 12:34:43 2012] Off-axis axis estimate = 4.93'
[Tue Jul  3 13:13:33 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 13:13:33 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Jul  3 13:13:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.927
[Tue Jul  3 13:13:33 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.89"
[Tue Jul  3 13:35:39 2012] fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jul  3 13:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13.csv
[Tue Jul  3 13:35:39 2012] fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jul  3 13:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13.csv
[Tue Jul  3 13:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:35:39 2012] fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jul  3 13:35:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul  3 13:35:39 2012] fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jul  3 13:35:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul  3 13:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201830301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:35:45 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.875057 pixels away
[Tue Jul  3 13:35:45 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:35:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:35:45 2012] Assessing source extent using major
[Tue Jul  3 13:35:45 2012] Source does appear to be extended
[Tue Jul  3 13:35:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:35:45 2012] Deleting source due to low Poisson probability 0.7