[Wed May  1 09:03:18 2013] Detection parameters:
  Position = (401.3, 428.9) = 13 18 44.83 -0 43 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 14.0
  Background counts = 28.7
  Rate = 0.004 +/- 0.0007

[Wed May  1 09:03:18 2013] Off-axis axis estimate = 12.05'
[Wed May  1 09:04:19 2013] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Wed May  1 09:04:19 2013] Initial guess for spatial extent in simple fitting = 12.45"
[Wed May  1 09:04:19 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.929
[Wed May  1 09:04:19 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.45"
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src35.ximg exists
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May  1 09:40:04 2013] Fit fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src35 appears to have run properly
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May  1 09:40:04 2013] Fit fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed May  1 10:27:46 2013] Spatial fit model total counts = 405.035000, observed total counts = 378.000000
[Wed May  1 10:27:46 2013] Offset between fit and detection position for source 35 = 2.246906 pixels
[Wed May  1 10:27:46 2013] 402.509000 total counts/ 285.096000 bgd. counts: snr = 6.953775
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.246906 pixels
  Position = (403.4, 428.2) = 13 18 44.22 -0 44 5.9
  Extent = 17.9 (11.3-24.9)" x 10.9 (8.1-21.1)", rotation angle = 37 (104-0) degrees
  Source counts = 117.4 +/- 20.1
  Background counts = 285.1
  Rate = 0.006 +/- 0.001
[Wed May  1 10:27:46 2013] Vigneting correction estimate = 1.000000
[Wed May  1 10:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 10:27:46 2013] Assessing source extent using major axis lower bound
[Wed May  1 10:27:46 2013] Source does appear to be extended
[Wed May  1 10:27:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54
[Wed May  1 10:27:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 10:27:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 10:27:59 2013] Initial guess for spatial extent in simple fitting = 14.44"
[Wed May  1 10:27:59 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.960
[Wed May  1 10:27:59 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 14.44"
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35.csv
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35.csv
[Wed May  1 11:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May  1 11:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:45:17 2013] Warning, spatial fit 35 centroid is now closest to src. 11
[Wed May  1 11:45:17 2013] Vigneting correction estimate = 1.000000
[Wed May  1 11:45:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 11:45:17 2013] Assessing source extent using major axis lower bound
[Wed May  1 11:45:17 2013] Source does appear to be extended
[Wed May  1 11:45:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54
[Wed May  1 11:45:30 2013] XMMSAS src. selection expression = ellipse(35050.594000, 37201.605800, 1076.724031, 655.722019, 36.665000, X, Y)
[Wed May  1 11:45:30 2013] Writing source region out to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_src.reg
[Wed May  1 11:45:30 2013] Extracting stamp from image fullrun_pn_xmm0201751301_pi300-10000_cl_sm2.00.img.gz, (342, 366) - (465, 490)
[Wed May  1 11:45:30 2013] XMMSAS bgd. selection expression = annulus(35050.594000, 37201.605800, 1794.540052, 3589.080103, X, Y) && !ellipse(33195.445740, 33865.033508, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  1 11:45:30 2013] Writing fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35.gif
[Wed May  1 11:59:08 2013] Mean detx,y = (-13975.16, 8215.79) 
[Wed May  1 11:59:10 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 11:59:45 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 11:59:45 2013] Setting source spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May  1 11:59:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed May  1 12:36:40 2013] Updating aperture counts using extracted products
[Wed May  1 12:36:40 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 388.00
[Wed May  1 12:36:40 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 2804.00
[Wed May  1 12:36:40 2013] Got source and background scale factors 2083156.000000, 26525925.000000
[Wed May  1 12:36:40 2013] User source parameters:
  Position = (403.4, 428.2) = 13 18 44.22 -0 44 5.9
  Extent = 17.9 (11.3-24.9)" x 10.9 (8.1-21.1)", rotation angle = 37 (104-0) degrees
  Source aperture counts = 167.8 +/- 20.7
  Background aperture counts = 220.2
  Rate = 0.009 +/- 0.001

[Wed May  1 12:36:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 12:36:41 2013] Using photon index=1.80, rate=0.00626, arf fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35.arf
[Wed May  1 12:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 12:36:41 2013] Updating source flux to 5.2e-14
[Wed May  1 12:36:52 2013] xmm0201751301/analysis//spectral/fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete