[Wed May 1 09:03:18 2013] Detection parameters: Position = (372.6, 147.5) = 13 18 53.16 -1 4 26.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 60.0 +/- 10.8 Background counts = 24.9 Rate = 0.003 +/- 0.0005 [Wed May 1 09:03:18 2013] Off-axis axis estimate = 12.19' [Wed May 1 09:04:19 2013] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting [Wed May 1 09:04:19 2013] Initial guess for spatial extent in simple fitting = 12.52" [Wed May 1 09:04:19 2013] source mask rpix=2.9, npix_max = 45, mask sum = 48, frac = 1.051 [Wed May 1 09:04:19 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 12.52" [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26.ximg exists [Wed May 1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26.csv [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26_1.ximg exists [Wed May 1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26.csv [Wed May 1 09:40:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Wed May 1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26.csv [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Wed May 1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26.csv [Wed May 1 09:40:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 10:27:46 2013] Spatial fit model total counts = -65.719300, observed total counts = 225.000000 [Wed May 1 10:27:46 2013] Poor agreement between spatial fit and data for source 26 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 10:27:46 2013] Source 26 is offset by -6.802403 and 3.103099 pixels which is larger than 2 X fitted extent = 1.451586 x 1.451586, not incorporating fit results [Wed May 1 10:27:46 2013] Vigneting correction estimate = 1.000000 [Wed May 1 10:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 10:27:46 2013] Assessing source extent using major [Wed May 1 10:27:46 2013] Source does appear to be extended [Wed May 1 10:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 10:27:59 2013] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting [Wed May 1 10:27:59 2013] Initial guess for spatial extent in simple fitting = 12.52" [Wed May 1 10:27:59 2013] source mask rpix=2.9, npix_max = 45, mask sum = 48, frac = 1.051 [Wed May 1 10:27:59 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 12.52" [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26.ximg exists [Wed May 1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26.csv [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26_1.ximg exists [Wed May 1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26.csv [Wed May 1 11:04:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Wed May 1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26.csv [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Wed May 1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26.csv [Wed May 1 11:04:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 11:45:17 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 17.061719 pixels away [Wed May 1 11:45:17 2013] Vigneting correction estimate = 1.000000 [Wed May 1 11:45:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 11:45:17 2013] Assessing source extent using major [Wed May 1 11:45:17 2013] Source does appear to be extended [Wed May 1 11:45:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 11:45:30 2013] XMMSAS src. selection expression = ellipse(32366.388947, 12783.167648, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 11:45:30 2013] Writing source region out to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_src.reg [Wed May 1 11:45:30 2013] Extracting stamp from image fullrun_pn_xmm0201751301_pi300-10000_cl_sm2.00.img.gz, (335, 110) - (410, 185) [Wed May 1 11:45:30 2013] XMMSAS bgd. selection expression = annulus(32366.388947, 12783.167648, 1087.500000, 2175.000000, X, Y) && !ellipse(33996.250366, 13420.264496, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 11:45:30 2013] Writing fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26.gif [Wed May 1 11:55:56 2013] Mean detx,y = (-1651.21, -13124.28) [Wed May 1 11:55:58 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 11:56:15 2013] Binned source spectrum to 10 counts/bin [Wed May 1 11:56:16 2013] Setting source spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Wed May 1 11:56:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_bgd.pi.gz [Wed May 1 12:12:27 2013] Not generating rmf since there are only 60 counts [Wed May 1 12:12:27 2013] rmf not generated due to insufficient counts [Wed May 1 12:36:39 2013] Updating aperture counts using extracted products [Wed May 1 12:36:39 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 147.00 [Wed May 1 12:36:39 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 776.00 [Wed May 1 12:36:39 2013] Got source and background scale factors 1080723.000000, 7433347.000000 [Wed May 1 12:36:39 2013] User source parameters: Position = (372.6, 147.5) = 13 18 53.16 -1 4 26.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 34.2 +/- 13.2 Background aperture counts = 112.8 Rate = 0.002 +/- 0.0007 [Wed May 1 12:36:39 2013] Updating counts from extracted products [Wed May 1 12:36:39 2013] Set source signif. to 34.18/10.62 = 3.22 [Wed May 1 12:36:41 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 12:36:41 2013] Using photon index=1.80, rate=0.00182, arf fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26.arf [Wed May 1 12:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 12:36:41 2013] Updating source flux to 1.5e-14 [Wed May 1 12:36:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 12:36:52 2013] xmm0201751301/analysis//spectral/fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete