[Wed May  1 09:03:18 2013] Detection parameters:
  Position = (336.9, 233.7) = 13 19 3.52 -0 58 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.3 +/- 13.1
  Background counts = 34.2
  Rate = 0.009 +/- 0.001

[Wed May  1 09:03:18 2013] Off-axis axis estimate = 5.46'
[Wed May  1 09:04:19 2013] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Wed May  1 09:04:19 2013] Initial guess for spatial extent in simple fitting = 9.16"
[Wed May  1 09:04:19 2013] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.847
[Wed May  1 09:04:19 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.16"
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25.ximg exists
[Wed May  1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25.csv
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May  1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25.csv
[Wed May  1 09:40:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May  1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May  1 09:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May  1 09:40:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 10:27:46 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 12.916589 pixels away
[Wed May  1 10:27:46 2013] Vigneting correction estimate = 1.000000
[Wed May  1 10:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 10:27:46 2013] Assessing source extent using major
[Wed May  1 10:27:46 2013] Source does appear to be extended
[Wed May  1 10:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 10:27:59 2013] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Wed May  1 10:27:59 2013] Initial guess for spatial extent in simple fitting = 9.16"
[Wed May  1 10:27:59 2013] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.847
[Wed May  1 10:27:59 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.16"
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25.ximg exists
[Wed May  1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25.csv
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May  1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25.csv
[Wed May  1 11:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May  1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May  1 11:04:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May  1 11:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:45:17 2013] Spatial fit model total counts = -526.281000, observed total counts = 276.000000
[Wed May  1 11:45:17 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 11:45:17 2013] Vigneting correction estimate = 1.000000
[Wed May  1 11:45:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 11:45:17 2013] Assessing source extent using major
[Wed May  1 11:45:17 2013] Source does appear to be extended
[Wed May  1 11:45:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 11:45:30 2013] XMMSAS src. selection expression = ellipse(29259.335602, 20286.575150, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  1 11:45:30 2013] Writing source region out to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_src.reg
[Wed May  1 11:45:30 2013] Extracting stamp from image fullrun_pn_xmm0201751301_pi300-10000_cl_sm2.00.img.gz, (299, 196) - (374, 271)
[Wed May  1 11:45:30 2013] XMMSAS bgd. selection expression = annulus(29259.335602, 20286.575150, 1087.500000, 2175.000000, X, Y) && !ellipse(28853.471020, 18788.935600, 437.626413, 437.626413, 0.000000, X, Y)
[Wed May  1 11:45:30 2013] Writing fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25.gif
[Wed May  1 11:55:33 2013] Mean detx,y = (-1752.83, -5000.58) 
[Wed May  1 11:55:34 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 11:55:48 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 11:55:49 2013] Setting source spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May  1 11:55:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May  1 12:12:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 12:12:16 2013] rmf not generated due to insufficient counts
[Wed May  1 12:36:39 2013] Updating aperture counts using extracted products
[Wed May  1 12:36:39 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 207.00
[Wed May  1 12:36:39 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1138.00
[Wed May  1 12:36:39 2013] Got source and background scale factors 983084.000000, 8462825.000000
[Wed May  1 12:36:39 2013] User source parameters:
  Position = (336.9, 233.7) = 13 19 3.52 -0 58 10.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.8 +/- 15.4
  Background aperture counts = 132.2
  Rate = 0.004 +/- 0.0008

[Wed May  1 12:36:39 2013] Updating counts from extracted products
[Wed May  1 12:36:39 2013] Set source signif. to 74.80/11.50 = 6.51
[Wed May  1 12:36:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 12:36:41 2013] Using photon index=1.80, rate=0.00399, arf fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25.arf
[Wed May  1 12:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 12:36:41 2013] Updating source flux to 2e-14
[Wed May  1 12:36:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 12:36:52 2013] xmm0201751301/analysis//spectral/fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete