[Wed May  1 09:03:17 2013] Detection parameters:
  Position = (215.5, 350.8) = 13 19 38.73 -0 49 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3122.0 +/- 63.9
  Background counts = 28.7
  Rate = 0.2 +/- 0.003

[Wed May  1 09:03:18 2013] Off-axis axis estimate = 7.11'
[Wed May  1 09:04:19 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Wed May  1 09:04:19 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Wed May  1 09:04:19 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.672
[Wed May  1 09:04:19 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.98"
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2.csv
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2.csv
[Wed May  1 09:40:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  1 09:40:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 10:27:46 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.827374 pixels away
[Wed May  1 10:27:46 2013] Vigneting correction estimate = 1.000000
[Wed May  1 10:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 10:27:46 2013] Assessing source extent using major
[Wed May  1 10:27:46 2013] Source does appear to be extended
[Wed May  1 10:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 10:27:59 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Wed May  1 10:27:59 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Wed May  1 10:27:59 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.672
[Wed May  1 10:27:59 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.98"
[Wed May  1 11:04:20 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  1 11:04:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2.csv
[Wed May  1 11:04:20 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  1 11:04:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2.csv
[Wed May  1 11:04:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  1 11:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:45:17 2013] Spatial fit model total counts = 6947.900000, observed total counts = 2900.000000
[Wed May  1 11:45:17 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 11:45:17 2013] Vigneting correction estimate = 1.000000
[Wed May  1 11:45:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 11:45:17 2013] Assessing source extent using major
[Wed May  1 11:45:17 2013] Source does appear to be extended
[Wed May  1 11:45:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 11:45:30 2013] Counts = 3122.018555, rescaling region sizes by 2.000000
[Wed May  1 11:45:30 2013] XMMSAS src. selection expression = ellipse(18698.542389, 30466.893372, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May  1 11:45:30 2013] Writing source region out to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_src.reg
[Wed May  1 11:45:30 2013] Extracting stamp from image fullrun_pn_xmm0201751301_pi300-10000_cl_sm2.00.img.gz, (140, 276) - (290, 426)
[Wed May  1 11:45:30 2013] XMMSAS bgd. selection expression = annulus(18698.542389, 30466.893372, 4350.000000, 8700.000000, X, Y) && !ellipse(26674.064300, 33574.662200, 541.608816, 316.396009, 8.009689, X, Y) && !ellipse(25277.782080, 24019.231800, 628.846418, 453.788813, 105.204974, X, Y) && !ellipse(19591.449982, 33082.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16728.750931, 32897.920502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22191.766800, 31301.421200, 426.027212, 426.027212, 0.000000, X, Y) && !ellipse(14367.467438, 27459.193878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11918.402039, 26336.636871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12995.539459, 25065.161926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18834.179460, 24186.734600, 328.244009, 328.244009, 0.000000, X, Y) && !ellipse(19168.882740, 22748.831800, 445.043213, 445.043213, 0.000000, X, Y)
[Wed May  1 11:45:30 2013] Writing fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2.gif
[Wed May  1 11:46:01 2013] Mean detx,y = (3813.87, 8542.55) 
[Wed May  1 11:46:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 11:47:52 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 11:47:52 2013] Setting source spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  1 11:47:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  1 11:59:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 11:59:54 2013] rmf not generated due to insufficient counts
[Wed May  1 12:36:36 2013] Updating aperture counts using extracted products
[Wed May  1 12:36:36 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3314.00
[Wed May  1 12:36:36 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 14843.00
[Wed May  1 12:36:36 2013] Got source and background scale factors 4011552.000000, 111696842.000000
[Wed May  1 12:36:36 2013] User source parameters:
  Position = (215.5, 350.8) = 13 19 38.73 -0 49 38.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2780.9 +/- 58.6
  Background aperture counts = 533.1
  Rate = 0.1 +/- 0.003

[Wed May  1 12:36:36 2013] Updating counts from extracted products
[Wed May  1 12:36:36 2013] Set source signif. to 2780.92/23.09 = 120.45
[Wed May  1 12:36:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 12:36:40 2013] Using photon index=1.80, rate=0.148, arf fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2.arf
[Wed May  1 12:36:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 12:36:40 2013] Updating source flux to 6.6e-13
[Wed May  1 12:36:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 12:36:52 2013] xmm0201751301/analysis//spectral/fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete