[Wed May 1 09:03:18 2013] Detection parameters: Position = (344.0, 291.7) = 13 19 1.45 -0 53 59.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 77.4 +/- 12.6 Background counts = 32.0 Rate = 0.006 +/- 0.0009 [Wed May 1 09:03:18 2013] Off-axis axis estimate = 3.34' [Wed May 1 09:04:19 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting [Wed May 1 09:04:19 2013] Initial guess for spatial extent in simple fitting = 8.10" [Wed May 1 09:04:19 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896 [Wed May 1 09:04:19 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.10" [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19.ximg exists [Wed May 1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19.csv [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19_1.ximg exists [Wed May 1 09:40:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19.csv [Wed May 1 09:40:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Wed May 1 09:40:04 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Wed May 1 09:40:04 2013] Fit fullrun_pn_xmm0201751301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Wed May 1 10:27:46 2013] Source 19 is offset by -6.519084 and -4.858952 pixels which is larger than 2 X fitted extent = 0.930933 x 0.930933, not incorporating fit results [Wed May 1 10:27:46 2013] Vigneting correction estimate = 1.000000 [Wed May 1 10:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 10:27:46 2013] Assessing source extent using major [Wed May 1 10:27:46 2013] Source does appear to be extended [Wed May 1 10:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 10:27:59 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting [Wed May 1 10:27:59 2013] Initial guess for spatial extent in simple fitting = 8.10" [Wed May 1 10:27:59 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896 [Wed May 1 10:27:59 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.10" [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19.ximg exists [Wed May 1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19.csv [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19_1.ximg exists [Wed May 1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19.csv [Wed May 1 11:04:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Wed May 1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19.csv [Wed May 1 11:04:21 2013] fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Wed May 1 11:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19.csv [Wed May 1 11:04:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201751301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 11:45:17 2013] Spatial fit model total counts = 317.300000, observed total counts = 267.000000 [Wed May 1 11:45:17 2013] Poor agreement between spatial fit and data for source 19 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 11:45:17 2013] Vigneting correction estimate = 1.000000 [Wed May 1 11:45:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 11:45:17 2013] Assessing source extent using major [Wed May 1 11:45:17 2013] Source does appear to be extended [Wed May 1 11:45:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 11:45:30 2013] XMMSAS src. selection expression = ellipse(29881.849701, 25329.977203, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 11:45:30 2013] Writing source region out to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_src.reg [Wed May 1 11:45:30 2013] Extracting stamp from image fullrun_pn_xmm0201751301_pi300-10000_cl_sm2.00.img.gz, (307, 254) - (382, 329) [Wed May 1 11:45:30 2013] XMMSAS bgd. selection expression = annulus(29881.849701, 25329.977203, 1087.500000, 2175.000000, X, Y) && !ellipse(30143.976960, 23788.283000, 471.679214, 471.679214, 0.000000, X, Y) [Wed May 1 11:45:30 2013] Writing fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19.gif [Wed May 1 11:53:32 2013] Mean detx,y = (-4478.15, -561.48) [Wed May 1 11:53:34 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 11:53:50 2013] Binned source spectrum to 10 counts/bin [Wed May 1 11:53:50 2013] Setting source spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Wed May 1 11:53:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_bgd.pi.gz [Wed May 1 12:11:37 2013] Not generating rmf since there are only 77 counts [Wed May 1 12:11:37 2013] rmf not generated due to insufficient counts [Wed May 1 12:36:38 2013] Updating aperture counts using extracted products [Wed May 1 12:36:38 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 196.00 [Wed May 1 12:36:38 2013] Total counts from fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1146.00 [Wed May 1 12:36:38 2013] Got source and background scale factors 1088404.000000, 8988235.000000 [Wed May 1 12:36:38 2013] User source parameters: Position = (344.0, 291.7) = 13 19 1.45 -0 53 59.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 57.2 +/- 15.0 Background aperture counts = 138.8 Rate = 0.003 +/- 0.0008 [Wed May 1 12:36:38 2013] Updating counts from extracted products [Wed May 1 12:36:38 2013] Set source signif. to 57.23/11.78 = 4.86 [Wed May 1 12:36:41 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 12:36:41 2013] Using photon index=1.80, rate=0.00305, arf fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19.arf [Wed May 1 12:36:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 12:36:41 2013] Updating source flux to 1.2e-14 [Wed May 1 12:36:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 12:36:52 2013] xmm0201751301/analysis//spectral/fullrun_pn_xmm0201751301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete