[Tue Feb 14 03:44:28 2012] Detection parameters:
  Position = (294.0, 151.1) = 0 35 43.34 -27 37 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 504.3 +/- 28.8
  Background counts = 40.2
  Rate = 0.02 +/- 0.001

[Tue Feb 14 03:44:28 2012] Off-axis axis estimate = 10.68'
[Tue Feb 14 04:14:33 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 04:14:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 04:14:33 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Tue Feb 14 04:14:33 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.876
[Tue Feb 14 04:14:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.77"
[Tue Feb 14 04:30:13 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 04:30:13 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 04:30:13 2012] Fit fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Feb 14 04:30:13 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 04:30:13 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 04:30:13 2012] Fit fullrun_mos1_xmm0201751101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 04:39:08 2012] Spatial fit model total counts = 483.001000, observed total counts = 483.000000
[Tue Feb 14 04:39:08 2012] Offset between fit and detection position for source 13 = 0.225881 pixels
[Tue Feb 14 04:39:08 2012] 486.041000 total counts/ 230.229000 bgd. counts: snr = 16.859353
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.225881 pixels
  Position = (294.2, 151.3) = 0 35 43.29 -27 37 30.4
  Extent = 6.5 (5.8-7.3)", rotation angle = 0
  Source counts = 255.8 +/- 22.0
  Background counts = 230.2
  Rate = 0.02 +/- 0.002
[Tue Feb 14 04:39:08 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 04:39:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 04:39:08 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 04:39:08 2012] Source does appear to be extended
[Tue Feb 14 04:39:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 05:09:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 05:09:27 2012] Initial guess for spatial extent in simple fitting = 6.55"
[Tue Feb 14 05:09:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.995
[Tue Feb 14 05:09:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.55"
[Tue Feb 14 05:23:21 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 05:23:21 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 05:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 05:23:22 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 05:23:22 2012] fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 05:23:22 2012] Fit fullrun_mos1_xmm0201751101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 05:31:15 2012] Spatial fit model total counts = 408.000000, observed total counts = 408.000000
[Tue Feb 14 05:31:15 2012] Offset between fit and detection position for source 13 = 0.045754 pixels
[Tue Feb 14 05:31:15 2012] 405.222000 total counts/ 158.555000 bgd. counts: snr = 19.589398
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.045754 pixels
  Position = (294.2, 151.3) = 0 35 43.28 -27 37 30.3
  Extent = 6.3 (5.6-7.1)", rotation angle = 0
  Source counts = 246.7 +/- 20.1
  Background counts = 158.6
  Rate = 0.02 +/- 0.001
[Tue Feb 14 05:31:15 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 05:31:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 05:31:15 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 05:31:15 2012] Source does appear to be extended
[Tue Feb 14 05:31:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 05:52:10 2012] XMMSAS src. selection expression = ellipse(25547.336100, 13116.501400, 377.708411, 377.708411, 0.000000, X, Y)
[Tue Feb 14 05:52:10 2012] Writing source region out to fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_src.reg
[Tue Feb 14 05:52:10 2012] Extracting stamp from image fullrun_mos1_xmm0201751101_pi300-10000_cl_sm2.00.img.gz, (272, 130) - (316, 173)
[Tue Feb 14 05:52:10 2012] XMMSAS bgd. selection expression = annulus(25547.336100, 13116.501400, 629.514018, 1259.028036, X, Y)
[Tue Feb 14 05:52:10 2012] Writing fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13.gif
[Tue Feb 14 05:52:11 2012] Mean detx,y = (11041.38, -4367.73) 
[Tue Feb 14 05:52:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 05:52:20 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 05:52:20 2012] Setting source spectrum file to fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 05:52:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Feb 14 06:12:16 2012] Updating aperture counts using extracted products
[Tue Feb 14 06:12:16 2012] Error reading totcts from fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 06:12:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 06:12:17 2012] Using photon index=1.80, rate=0.0173, arf fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13.arf
[Tue Feb 14 06:12:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 06:12:17 2012] Updating source flux to 3.8e-13
[Tue Feb 14 06:12:30 2012] Reading fit data from xmm0201751101/analysis//spectral/fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_pl.csv
[Tue Feb 14 06:12:30 2012] Spectral fit parameter nH value = 1.49273e+13
[Tue Feb 14 06:12:30 2012] Spectral fit parameter PhoIndex value = 1.96513
[Tue Feb 14 06:12:30 2012] Failed to get F(0.3-8.0) from xmm0201751101/analysis//spectral/fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 06:12:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 06:12:30 2012] Using Nh = 1.5e+13, photon index=1.97, rate=0.0173, arf fullrun_mos1_xmm0201751101_pi300-10000_pass1_cl_src13.arf
[Tue Feb 14 06:12:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 06:12:30 2012] Updating source flux to 3.5e-13