[Fri Feb 17 09:00:48 2012] Detection parameters:
  Position = (289.1, 205.8) = 18 27 39.42 6 25 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 9.4
  Background counts = 3.2
  Rate = 0.008 +/- 0.001

[Fri Feb 17 09:00:48 2012] Off-axis axis estimate = 6.75'
[Fri Feb 17 09:39:14 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 09:39:14 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Fri Feb 17 09:39:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.187
[Fri Feb 17 09:39:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.80"
[Fri Feb 17 09:55:47 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 09:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 09:55:47 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 09:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 09:55:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:55:50 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 09:55:50 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 09:55:50 2012] Fit fullrun_mos2_xmm0201730101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 09:56:11 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.799869 pixels away
[Fri Feb 17 09:56:11 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:56:11 2012] Assessing source extent using major
[Fri Feb 17 09:56:11 2012] Source does appear to be extended
[Fri Feb 17 09:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 10:34:13 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:34:13 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Fri Feb 17 10:34:13 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.187
[Fri Feb 17 10:34:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.80"
[Fri Feb 17 10:52:24 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 10:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 10:52:24 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 10:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 10:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 10:52:24 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 10:52:24 2012] fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 10:52:24 2012] Fit fullrun_mos2_xmm0201730101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 10:52:32 2012] Spatial fit model total counts = 103.000000, observed total counts = 103.000000
[Fri Feb 17 10:52:32 2012] Offset between fit and detection position for source 4 = 0.342295 pixels
[Fri Feb 17 10:52:32 2012] 104.377800 total counts/ 69.223700 bgd. counts: snr = 4.225213
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.342295 pixels
  Position = (289.3, 205.5) = 18 27 39.37 6 25 53.8
  Extent = 4.6 (3.5-6.5)", rotation angle = 0
  Source counts = 35.2 +/- 10.2
  Background counts = 69.2
  Rate = 0.003 +/- 0.001
[Fri Feb 17 10:52:32 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 10:52:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 10:52:32 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 10:52:32 2012] Source does appear to be extended
[Fri Feb 17 10:52:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 11:11:38 2012] XMMSAS src. selection expression = ellipse(25122.798400, 17829.415600, 273.377408, 273.377408, 0.000000, X, Y)
[Fri Feb 17 11:11:38 2012] Writing source region out to fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4_src.reg
[Fri Feb 17 11:11:38 2012] Extracting stamp from image fullrun_mos2_xmm0201730101_pi300-10000_cl_sm2.00.img.gz, (274, 190) - (305, 221)
[Fri Feb 17 11:11:38 2012] XMMSAS bgd. selection expression = annulus(25122.798400, 17829.415600, 455.629013, 911.258026, X, Y)
[Fri Feb 17 11:11:38 2012] Writing fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4.gif
[Fri Feb 17 11:11:41 2012] Mean detx,y = (797.41, -9736.68) 
[Fri Feb 17 11:11:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 11:11:52 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 11:11:52 2012] Setting source spectrum file to fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 17 11:11:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Feb 17 11:14:42 2012] Not generating rmf since there are only 35 counts
[Fri Feb 17 11:14:42 2012] rmf not generated due to insufficient counts
[Fri Feb 17 11:15:54 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:15:54 2012] Error reading totcts from fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 17 11:15:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:15:55 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4.arf
[Fri Feb 17 11:15:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:15:55 2012] Updating source flux to 7.2e-14
[Fri Feb 17 11:15:58 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 11:15:59 2012] xmm0201730101/analysis//spectral/fullrun_mos2_xmm0201730101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete