[Thu Sep 29 22:43:32 2011] Detection parameters:
  Position = (310.5, 156.2) = 13 56 5.57 5 3 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.0 +/- 21.6
  Background counts = 27.6
  Rate = 0.009 +/- 0.0007

[Thu Sep 29 22:43:33 2011] Off-axis axis estimate = 10.35'
[Thu Sep 29 23:22:08 2011] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 23:22:08 2011] Initial guess for spatial extent in simple fitting = 11.60"
[Thu Sep 29 23:22:08 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.047
[Thu Sep 29 23:22:08 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 11.60"
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Sep 29 23:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5.csv
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Sep 29 23:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5.csv
[Thu Sep 29 23:49:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 23:49:41 2011] Fit fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 23:49:50 2011] Spatial fit model total counts = 412.993000, observed total counts = 413.000000
[Thu Sep 29 23:49:50 2011] Offset between fit and detection position for source 9 = 0.096200 pixels
[Thu Sep 29 23:49:50 2011] 415.229000 total counts/ 243.629000 bgd. counts: snr = 10.993926
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.096200 pixels
  Position = (310.4, 156.3) = 13 56 5.57 5 3 19.3
  Extent = 5.3 (4.5-6.1)", rotation angle = 0
  Source counts = 171.6 +/- 20.4
  Background counts = 243.6
  Rate = 0.006 +/- 0.0007
[Thu Sep 29 23:49:50 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:49:50 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:49:50 2011] Source does appear to be extended
[Thu Sep 29 23:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:24:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:24:34 2011] Initial guess for spatial extent in simple fitting = 5.32"
[Fri Sep 30 00:24:34 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.757
[Fri Sep 30 00:24:34 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.32"
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Sep 30 00:48:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5.csv
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Sep 30 00:48:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5.csv
[Fri Sep 30 00:48:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 00:48:47 2011] Fit fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 00:48:55 2011] Spatial fit model total counts = 413.691000, observed total counts = 413.000000
[Fri Sep 30 00:48:55 2011] Offset between fit and detection position for source 9 = 0.007423 pixels
[Fri Sep 30 00:48:55 2011] 415.938000 total counts/ 245.333000 bgd. counts: snr = 10.892154
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.007423 pixels
  Position = (310.5, 156.3) = 13 56 5.57 5 3 19.3
  Extent = 5.2 (4.5-6.1)", rotation angle = 0
  Source counts = 170.6 +/- 20.4
  Background counts = 245.3
  Rate = 0.006 +/- 0.0007
[Fri Sep 30 00:48:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:55 2011] Source does appear to be extended
[Fri Sep 30 00:48:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:31:54 2011] XMMSAS src. selection expression = ellipse(26960.691000, 13551.273600, 313.857609, 313.857609, 0.000000, X, Y)
[Fri Sep 30 01:31:54 2011] Writing source region out to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9_src.reg
[Fri Sep 30 01:31:54 2011] Extracting stamp from image fullrun_mos2_xmm0201670201_pi300-10000_cl_sm2.00.img.gz, (292, 138) - (328, 174)
[Fri Sep 30 01:31:54 2011] XMMSAS bgd. selection expression = annulus(26960.691000, 13551.273600, 523.096015, 1046.192030, X, Y)
[Fri Sep 30 01:31:54 2011] Writing fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9.gif
[Fri Sep 30 01:32:39 2011] Mean detx,y = (4096.57, -13691.25) 
[Fri Sep 30 01:32:40 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 01:32:46 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 01:32:47 2011] Setting source spectrum file to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Sep 30 01:32:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Sep 30 02:02:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:02:07 2011] Error reading totcts from fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Sep 30 02:02:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:02:07 2011] Using photon index=1.80, rate=0.00573, arf fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src9.arf
[Fri Sep 30 02:02:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 02:02:07 2011] Updating source flux to 1.8e-13