[Thu Sep 29 22:43:32 2011] Detection parameters:
  Position = (303.8, 321.3) = 13 56 7.50 5 15 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 791.3 +/- 35.5
  Background counts = 35.5
  Rate = 0.03 +/- 0.001

[Thu Sep 29 22:43:33 2011] Off-axis axis estimate = 1.71'
[Thu Sep 29 23:22:08 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:08 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Sep 29 23:22:08 2011] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.741
[Thu Sep 29 23:22:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 23:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 23:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 23:49:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 23:49:41 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 23:49:41 2011] Fit fullrun_mos2_xmm0201670201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 23:49:50 2011] Spatial fit model total counts = 1153.190000, observed total counts = 1149.000000
[Thu Sep 29 23:49:50 2011] Offset between fit and detection position for source 1 = 0.068234 pixels
[Thu Sep 29 23:49:50 2011] 1124.138000 total counts/ 614.162000 bgd. counts: snr = 20.578242
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.068234 pixels
  Position = (303.9, 321.3) = 13 56 7.48 5 15 17.1
  Extent = 6.7 (6.2-7.2)", rotation angle = 0
  Source counts = 510.0 +/- 33.5
  Background counts = 614.2
  Rate = 0.02 +/- 0.001
[Thu Sep 29 23:49:50 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:49:50 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:49:50 2011] Source does appear to be extended
[Thu Sep 29 23:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:49:50 2011] Source is confused with source 12
[Fri Sep 30 00:24:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:24:34 2011] Initial guess for spatial extent in simple fitting = 6.73"
[Fri Sep 30 00:24:34 2011] source mask rpix=1.5, npix_max = 16, mask sum = 11, frac = 0.656
[Fri Sep 30 00:24:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.73"
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 00:48:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 00:48:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 00:48:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 00:48:47 2011] fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:48:47 2011] Fit fullrun_mos2_xmm0201670201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:48:55 2011] Warning, spatial fit 1 centroid is now closest to src. 12
[Fri Sep 30 00:48:55 2011] Spatial fit model total counts = 1151.220000, observed total counts = 1153.000000
[Fri Sep 30 00:48:55 2011] Offset between fit and detection position for source 1 = 0.095413 pixels
[Fri Sep 30 00:48:55 2011] Warning, changing simple spatial fit ID from 1 to 10
[Fri Sep 30 00:48:55 2011] 1071.748000 total counts/ 633.306000 bgd. counts: snr = 17.422294
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095413 pixels
  Position = (303.9, 321.4) = 13 56 7.48 5 15 17.5
  Extent = 6.5 (5.4-7.5)", rotation angle = 0
  Source counts = 438.4 +/- 32.7
  Background counts = 633.3
  Rate = 0.01 +/- 0.001
[Fri Sep 30 00:48:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:55 2011] Source does appear to be extended
[Fri Sep 30 00:48:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:31:54 2011] XMMSAS src. selection expression = ellipse(26389.078760, 27914.828800, 390.405011, 390.405011, 0.000000, X, Y)
[Fri Sep 30 01:31:54 2011] Writing source region out to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 01:31:54 2011] Extracting stamp from image fullrun_mos2_xmm0201670201_pi300-10000_cl_sm2.00.img.gz, (281, 299) - (326, 344)
[Fri Sep 30 01:31:54 2011] XMMSAS bgd. selection expression = annulus(26389.078760, 27914.828800, 650.675019, 1301.350037, X, Y) && !ellipse(25630.585660, 28364.741800, 265.577608, 265.577608, 0.000000, X, Y) && !ellipse(26391.428480, 27884.231000, 481.461614, 481.461614, 0.000000, X, Y)
[Fri Sep 30 01:31:54 2011] Writing fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 01:31:56 2011] Mean detx,y = (123.37, 103.60) 
[Fri Sep 30 01:31:57 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 01:32:05 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 01:32:05 2011] Setting source spectrum file to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 01:32:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 02:02:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:02:07 2011] Error reading totcts from fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 02:02:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:02:07 2011] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 02:02:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 02:02:07 2011] Updating source flux to 1.8e-13
[Fri Sep 30 02:02:46 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Sep 30 02:03:54 2011] Reading fit data from xmm0201670201/analysis//spectral/fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 02:03:54 2011] Spectral fit parameter nH value = 6.38717e+20
[Fri Sep 30 02:03:54 2011] Spectral fit parameter PhoIndex value = 2.07176
[Fri Sep 30 02:03:54 2011] Failed to get F(0.3-8.0) from xmm0201670201/analysis//spectral/fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 02:03:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:03:54 2011] Using Nh = 6.4e+20, photon index=2.07, rate=0.0147, arf fullrun_mos2_xmm0201670201_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 02:03:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 02:03:54 2011] Updating source flux to 1.7e-13