[Sat Oct 15 02:25:57 2011] Detection parameters:
  Position = (309.6, 313.7) = 12 25 23.00 18 10 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.0 +/- 22.3
  Background counts = 107.0
  Rate = 0.007 +/- 0.0007

[Sat Oct 15 02:25:57 2011] Off-axis axis estimate = 1.37'
[Sat Oct 15 04:40:03 2011] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 04:40:03 2011] Initial guess for spatial extent in simple fitting = 7.11"
[Sat Oct 15 04:40:03 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sat Oct 15 04:40:03 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.11"
[Sat Oct 15 05:05:38 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Oct 15 05:05:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5.csv
[Sat Oct 15 05:05:38 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Oct 15 05:05:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5.csv
[Sat Oct 15 05:05:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 05:05:38 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 15 05:05:38 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 15 05:05:38 2011] Fit fullrun_mos2_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 15 05:05:56 2011] Source 7 is offset by 3.994251 and -6.848473 pixels which is larger than
2 X fitted extent = 2.809356 x 2.809356, not incorporating fit results
[Sat Oct 15 05:05:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 05:05:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 05:05:56 2011] Assessing source extent using major
[Sat Oct 15 05:05:56 2011] Source does appear to be extended
[Sat Oct 15 05:05:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 07:08:17 2011] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 07:08:17 2011] Initial guess for spatial extent in simple fitting = 7.11"
[Sat Oct 15 07:08:17 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sat Oct 15 07:08:17 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.11"
[Sat Oct 15 07:30:31 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Oct 15 07:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5.csv
[Sat Oct 15 07:30:31 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Oct 15 07:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5.csv
[Sat Oct 15 07:30:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 07:30:31 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 15 07:30:31 2011] fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 15 07:30:31 2011] Fit fullrun_mos2_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 15 07:30:49 2011] Spatial fit model total counts = 534.923000, observed total counts = 537.000000
[Sat Oct 15 07:30:49 2011] Offset between fit and detection position for source 7 = 0.348961 pixels
[Sat Oct 15 07:30:49 2011] 541.633400 total counts/ 467.993000 bgd. counts: snr = 3.404054
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.348961 pixels
  Position = (309.3, 313.6) = 12 25 23.10 18 10 51.5
  Extent = 3.8 (3.1-4.8)", rotation angle = 0
  Source counts = 73.6 +/- 23.3
  Background counts = 468.0
  Rate = 0.003 +/- 0.001
[Sat Oct 15 07:30:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 07:30:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 07:30:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 07:30:49 2011] Source does appear to be extended
[Sat Oct 15 07:30:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 07:30:49 2011] Source is confused with source 6
[Sat Oct 15 08:45:21 2011] XMMSAS src. selection expression = ellipse(26861.800800, 27230.627400, 229.953007, 229.953007, 0.000000, X, Y)
[Sat Oct 15 08:45:21 2011] Writing source region out to fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7_src.reg
[Sat Oct 15 08:45:21 2011] Extracting stamp from image fullrun_mos2_xmm0201670101_pi300-10000_cl_sm2.00.img.gz, (296, 300) - (323, 327)
[Sat Oct 15 08:45:21 2011] XMMSAS bgd. selection expression = annulus(26861.800800, 27230.627400, 383.255011, 766.510022, X, Y) && !ellipse(26522.063460, 27944.658400, 673.055219, 673.055219, 0.000000, X, Y) && !ellipse(26495.786800, 28055.690000, 1211.616035, 676.280019, 239.490000, X, Y)
[Sat Oct 15 08:45:21 2011] Writing fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7.gif
[Sat Oct 15 08:47:13 2011] Mean detx,y = (-126.43, -686.64) 
[Sat Oct 15 08:47:16 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 08:47:29 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 08:47:30 2011] Setting source spectrum file to fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Oct 15 08:47:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Oct 15 08:57:32 2011] Not generating rmf since there are only 73 counts
[Sat Oct 15 08:57:32 2011] rmf not generated due to insufficient counts
[Sat Oct 15 09:02:59 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:02:59 2011] Error reading totcts from fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Oct 15 09:02:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:02:59 2011] Using photon index=1.80, rate=0.00346, arf fullrun_mos2_xmm0201670101_pi300-10000_pass1_cl_src7.arf
[Sat Oct 15 09:02:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 09:02:59 2011] Updating source flux to 5.2e-14
[Sat Oct 15 09:03:15 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Sat Oct 15 09:03:15 2011] Flag c found in src. 7 procflags, skipping spectral fitting
[Sat Oct 15 09:03:15 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting