[Sat Oct 15 02:25:54 2011] Detection parameters:
  Position = (352.5, 294.6) = 12 25 9.92 18 9 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.5 +/- 17.8
  Background counts = 87.8
  Rate = 0.003 +/- 0.0006

[Sat Oct 15 02:25:55 2011] Off-axis axis estimate = 3.93'
[Sat Oct 15 03:39:45 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:39:45 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Oct 15 03:39:45 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Sat Oct 15 03:39:45 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 8.39"
[Sat Oct 15 04:40:03 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Oct 15 04:40:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11.csv
[Sat Oct 15 04:40:03 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Oct 15 04:40:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11.csv
[Sat Oct 15 04:40:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 04:40:03 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 15 04:40:03 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 15 04:40:03 2011] Fit fullrun_mos1_xmm0201670101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct 15 05:05:52 2011] Source 13 is offset by 5.649673 and -8.138770 pixels which is larger than
2 X fitted extent = 0.964795 x 0.964795, not incorporating fit results
[Sat Oct 15 05:05:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 05:05:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 05:05:52 2011] Assessing source extent using major
[Sat Oct 15 05:05:52 2011] Source does appear to be extended
[Sat Oct 15 05:05:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:09:27 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:09:27 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Oct 15 06:09:27 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Sat Oct 15 06:09:27 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 8.39"
[Sat Oct 15 07:08:17 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Oct 15 07:08:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11.csv
[Sat Oct 15 07:08:17 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Oct 15 07:08:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11.csv
[Sat Oct 15 07:08:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 07:08:17 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 15 07:08:17 2011] fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 15 07:08:17 2011] Fit fullrun_mos1_xmm0201670101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 15 07:30:45 2011] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Sat Oct 15 07:30:45 2011] Offset between fit and detection position for source 13 = 0.233518 pixels
[Sat Oct 15 07:30:45 2011] 186.911400 total counts/ 141.203000 bgd. counts: snr = 3.846574
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.233518 pixels
  Position = (352.4, 294.8) = 12 25 9.96 18 9 29.7
  Extent = 5.6 (3.6-7.9)", rotation angle = 0
  Source counts = 45.7 +/- 13.7
  Background counts = 141.2
  Rate = 0.002 +/- 0.0006
[Sat Oct 15 07:30:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 07:30:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 07:30:45 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 07:30:45 2011] Source does appear to be extended
[Sat Oct 15 07:30:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 08:33:38 2011] XMMSAS src. selection expression = ellipse(30607.568600, 25595.628800, 334.242610, 334.242610, 0.000000, X, Y)
[Sat Oct 15 08:33:38 2011] Writing source region out to fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13_src.reg
[Sat Oct 15 08:33:38 2011] Extracting stamp from image fullrun_mos1_xmm0201670101_pi300-10000_cl_sm2.00.img.gz, (333, 276) - (372, 314)
[Sat Oct 15 08:33:38 2011] XMMSAS bgd. selection expression = annulus(30607.568600, 25595.628800, 557.071016, 1114.142032, X, Y) && !ellipse(31467.524600, 24282.970000, 278.589608, 278.589608, 0.000000, X, Y)
[Sat Oct 15 08:33:38 2011] Writing fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13.gif
[Sat Oct 15 08:38:02 2011] Mean detx,y = (-3239.31, 2952.65) 
[Sat Oct 15 08:38:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 08:38:15 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 08:38:15 2011] Setting source spectrum file to fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Oct 15 08:38:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Oct 15 08:45:06 2011] Not generating rmf since there are only 45 counts
[Sat Oct 15 08:45:06 2011] rmf not generated due to insufficient counts
[Sat Oct 15 09:02:58 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:02:58 2011] Error reading totcts from fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Oct 15 09:02:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:02:58 2011] Using photon index=1.80, rate=0.00216, arf fullrun_mos1_xmm0201670101_pi300-10000_pass1_cl_src13.arf
[Sat Oct 15 09:02:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 09:02:58 2011] Updating source flux to 3.2e-14
[Sat Oct 15 09:03:01 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Sat Oct 15 09:03:01 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting