[Tue Feb 14 06:40:50 2012] Detection parameters:
  Position = (477.1, 238.4) = 18 55 24.65 -37 57 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 18.2
  Background counts = 75.7
  Rate = 0.002 +/- 0.0003

[Tue Feb 14 06:40:50 2012] Off-axis axis estimate = 13.67'
[Tue Feb 14 06:42:56 2012] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 06:42:56 2012] Initial guess for spatial extent in simple fitting = 13.26"
[Tue Feb 14 06:42:56 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Tue Feb 14 06:42:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.26"
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 14 07:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 14 07:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 07:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 14 07:12:53 2012] Fit fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 14 07:34:00 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.588894 pixels away
[Tue Feb 14 07:34:00 2012] Source 5 is offset by -2.164264 and 3.492691 pixels which is larger than
2 X fitted extent = 1.659738 x 1.659738, not incorporating fit results
[Tue Feb 14 07:34:00 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 07:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 07:34:00 2012] Assessing source extent using major
[Tue Feb 14 07:34:00 2012] Source does appear to be extended
[Tue Feb 14 07:34:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 07:34:08 2012] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 07:34:08 2012] Initial guess for spatial extent in simple fitting = 13.26"
[Tue Feb 14 07:34:08 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Tue Feb 14 07:34:08 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.26"
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 14 07:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 14 07:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 07:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 07:59:42 2012] Fit fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 14 08:18:37 2012] Spatial fit model total counts = 316.738000, observed total counts = 317.000000
[Tue Feb 14 08:18:37 2012] Offset between fit and detection position for source 5 = 1.129296 pixels
[Tue Feb 14 08:18:37 2012] 305.306300 total counts/ 207.067000 bgd. counts: snr = 6.826999
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.129296 pixels
  Position = (476.7, 237.4) = 18 55 24.83 -37 57 33.7
  Extent = 11.6 (7.8-19.9)", rotation angle = 0
  Source counts = 98.2 +/- 17.5
  Background counts = 207.1
  Rate = 0.002 +/- 0.0004
[Tue Feb 14 08:18:37 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 08:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 08:18:37 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 08:18:37 2012] Source does appear to be extended
[Tue Feb 14 08:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 08:18:45 2012] XMMSAS src. selection expression = ellipse(41420.894900, 20601.362000, 693.546020, 693.546020, 0.000000, X, Y)
[Tue Feb 14 08:18:45 2012] Writing source region out to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5_src.reg
[Tue Feb 14 08:18:45 2012] Extracting stamp from image fullrun_mos1_xmm0201590101_pi300-10000_cl_sm2.00.img.gz, (437, 197) - (517, 277)
[Tue Feb 14 08:18:45 2012] XMMSAS bgd. selection expression = annulus(41420.894900, 20601.362000, 1155.910033, 2311.820067, X, Y) && !ellipse(40809.339630, 19334.598465, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 08:18:45 2012] Writing fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5.gif
[Tue Feb 14 08:22:53 2012] Mean detx,y = (3573.52, -16876.08) 
[Tue Feb 14 08:22:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 08:23:09 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 08:23:09 2012] Setting source spectrum file to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 08:23:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Feb 14 08:38:18 2012] Not generating rmf since there are only 98 counts
[Tue Feb 14 08:38:18 2012] rmf not generated due to insufficient counts
[Tue Feb 14 09:07:10 2012] Updating aperture counts using extracted products
[Tue Feb 14 09:07:10 2012] Error reading totcts from fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 09:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 09:07:10 2012] Using photon index=1.80, rate=0.00207, arf fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src5.arf
[Tue Feb 14 09:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 09:07:10 2012] Updating source flux to 7.5e-14
[Tue Feb 14 09:07:11 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Tue Feb 14 09:07:11 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting