[Tue Feb 14 06:40:50 2012] Detection parameters:
  Position = (299.3, 393.5) = 18 56 30.07 -37 46 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.6 +/- 19.8
  Background counts = 121.4
  Rate = 0.003 +/- 0.0005

[Tue Feb 14 06:40:50 2012] Off-axis axis estimate = 6.89'
[Tue Feb 14 06:42:56 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 06:42:56 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Tue Feb 14 06:42:56 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.815
[Tue Feb 14 06:42:56 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.87"
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13.ximg exists
[Tue Feb 14 07:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13.csv
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Feb 14 07:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13.csv
[Tue Feb 14 07:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Feb 14 07:12:53 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Feb 14 07:12:53 2012] Fit fullrun_mos1_xmm0201590101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Feb 14 07:34:00 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.199077 pixels away
[Tue Feb 14 07:34:00 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 07:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 07:34:00 2012] Assessing source extent using major
[Tue Feb 14 07:34:00 2012] Source does appear to be extended
[Tue Feb 14 07:34:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 07:34:08 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 07:34:08 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Tue Feb 14 07:34:08 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.815
[Tue Feb 14 07:34:08 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.87"
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12.ximg exists
[Tue Feb 14 07:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12.csv
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Feb 14 07:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12.csv
[Tue Feb 14 07:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Feb 14 07:59:42 2012] fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Feb 14 07:59:42 2012] Fit fullrun_mos1_xmm0201590101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Feb 14 08:18:37 2012] Spatial fit model total counts = 434.185000, observed total counts = 432.000000
[Tue Feb 14 08:18:37 2012] Offset between fit and detection position for source 13 = 0.203590 pixels
[Tue Feb 14 08:18:37 2012] 432.521300 total counts/ 375.678000 bgd. counts: snr = 2.932725
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.203590 pixels
  Position = (299.1, 393.5) = 18 56 30.15 -37 46 15.8
  Extent = 5.2 (3.1-8.0)", rotation angle = 0
  Source counts = 56.8 +/- 20.8
  Background counts = 375.7
  Rate = 0.001 +/- 0.0004
[Tue Feb 14 08:18:37 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 08:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 08:18:37 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 08:18:37 2012] Source does appear to be extended
[Tue Feb 14 08:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 08:18:45 2012] XMMSAS src. selection expression = ellipse(25970.521560, 34182.350400, 309.677409, 309.677409, 0.000000, X, Y)
[Tue Feb 14 08:18:45 2012] Writing source region out to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13_src.reg
[Tue Feb 14 08:18:45 2012] Extracting stamp from image fullrun_mos1_xmm0201590101_pi300-10000_cl_sm2.00.img.gz, (281, 376) - (317, 411)
[Tue Feb 14 08:18:45 2012] XMMSAS bgd. selection expression = annulus(25970.521560, 34182.350400, 516.129015, 1032.258030, X, Y) && !ellipse(27329.358800, 35459.761000, 353.999210, 353.999210, 0.000000, X, Y)
[Tue Feb 14 08:18:45 2012] Writing fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13.gif
[Tue Feb 14 08:24:58 2012] Mean detx,y = (-9678.90, -1238.82) 
[Tue Feb 14 08:24:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 08:25:07 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 08:25:07 2012] Setting source spectrum file to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 08:25:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Feb 14 08:42:33 2012] Not generating rmf since there are only 56 counts
[Tue Feb 14 08:42:33 2012] rmf not generated due to insufficient counts
[Tue Feb 14 09:07:10 2012] Updating aperture counts using extracted products
[Tue Feb 14 09:07:10 2012] Error reading totcts from fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 09:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 09:07:10 2012] Using photon index=1.80, rate=0.0012, arf fullrun_mos1_xmm0201590101_pi300-10000_pass1_cl_src13.arf
[Tue Feb 14 09:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 09:07:10 2012] Updating source flux to 2.3e-14
[Tue Feb 14 09:07:11 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting