[Mon Feb 20 10:34:30 2012] Detection parameters:
  Position = (273.4, 282.0) = 4 54 12.44 2 55 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 321.5 +/- 30.0
  Background counts = 148.1
  Rate = 0.008 +/- 0.0007

[Mon Feb 20 10:34:32 2012] Off-axis axis estimate = 2.17'
[Mon Feb 20 16:23:25 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:23:25 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Mon Feb 20 16:23:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Mon Feb 20 16:23:25 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.51"
[Mon Feb 20 19:42:03 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Feb 20 19:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13.csv
[Mon Feb 20 19:42:03 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Feb 20 19:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13.csv
[Mon Feb 20 19:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:42:04 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Feb 20 19:42:04 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Feb 20 19:42:04 2012] Fit fullrun_mos2_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Feb 20 19:42:50 2012] Spatial fit model total counts = 3589.980000, observed total counts = 3590.000000
[Mon Feb 20 19:42:50 2012] Offset between fit and detection position for source 14 = 1.693920 pixels
[Mon Feb 20 19:42:50 2012] Warning, changing simple spatial fit ID from 13 to 11
[Mon Feb 20 19:42:50 2012] 3372.392000 total counts/ 3237.140000 bgd. counts: snr = 2.377185
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.693920 pixels
  Position = (273.0, 280.4) = 4 54 12.54 2 55 25.5
  Extent = 8.3 (5.1-15.3)", rotation angle = 0
  Source counts = 135.3 +/- 58.1
  Background counts = 3237.1
  Rate = 0.003 +/- 0.001
[Mon Feb 20 19:42:51 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 19:42:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 19:42:51 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 19:42:51 2012] Source does appear to be extended
[Mon Feb 20 19:42:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 19:42:51 2012] Source is confused with source 16
[Tue Feb 21 01:24:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:24:49 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Feb 21 01:24:49 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Tue Feb 21 01:24:49 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.31"
[Tue Feb 21 04:11:06 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Feb 21 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13.csv
[Tue Feb 21 04:11:06 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Feb 21 04:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13.csv
[Tue Feb 21 04:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 04:11:07 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Feb 21 04:11:07 2012] fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Feb 21 04:11:07 2012] Fit fullrun_mos2_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Feb 21 04:11:46 2012] Spatial fit model total counts = 3590.180000, observed total counts = 3590.000000
[Tue Feb 21 04:11:46 2012] Offset between fit and detection position for source 14 = 0.387408 pixels
[Tue Feb 21 04:11:46 2012] Warning, changing simple spatial fit ID from 13 to 11
[Tue Feb 21 04:11:46 2012] 3061.045000 total counts/ 2680.570000 bgd. counts: snr = 7.348734
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.387408 pixels
  Position = (272.8, 280.7) = 4 54 12.61 2 55 26.9
  Extent = 12.6 (7.8-15.3)", rotation angle = 0
  Source counts = 380.5 +/- 55.3
  Background counts = 2680.6
  Rate = 0.008 +/- 0.001
[Tue Feb 21 04:11:46 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 04:11:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 04:11:46 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 04:11:46 2012] Source does appear to be extended
[Tue Feb 21 04:11:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:42:54 2012] XMMSAS src. selection expression = ellipse(23687.015480, 24372.654000, 756.186022, 756.186022, 0.000000, X, Y)
[Tue Feb 21 16:42:54 2012] Writing source region out to fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14_src.reg
[Tue Feb 21 16:42:54 2012] Extracting stamp from image fullrun_mos2_xmm0201510101_pi300-10000_cl_sm2.00.img.gz, (229, 237) - (316, 324)
[Tue Feb 21 16:42:54 2012] XMMSAS bgd. selection expression = annulus(23687.015480, 24372.654000, 1260.310036, 2520.620073, X, Y) && !ellipse(25313.818000, 23121.312000, 1273.624037, 1273.624037, 0.000000, X, Y) && !ellipse(24929.262000, 23372.854000, 1348.744039, 1348.744039, 0.000000, X, Y) && !ellipse(24589.676200, 24779.628000, 1132.184033, 1132.184033, 0.000000, X, Y) && !ellipse(24548.018000, 23567.828000, 1933.376056, 1933.376056, 0.000000, X, Y) && !ellipse(23539.134000, 23605.944000, 2636.576076, 2636.576076, 0.000000, X, Y) && !ellipse(23669.425800, 25575.448000, 1182.272034, 1182.272034, 0.000000, X, Y) && !ellipse(25866.925240, 22254.695000, 738.326421, 738.326421, 0.000000, X, Y) && !ellipse(23683.388300, 24655.808000, 963.344028, 963.344028, 0.000000, X, Y) && !ellipse(23703.676178, 24051.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.946000, 25594.715400, 1423.800041, 1423.800041, 0.000000, X, Y) && !ellipse(24622.812800, 25270.666000, 1550.016045, 1550.016045, 0.000000, X, Y) && !ellipse(23257.185211, 24126.680756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.610748, 26044.089813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24810.810120, 22409.665344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.070000, 25442.070000, 1044.864030, 1044.864030, 0.000000, X, Y) && !ellipse(26443.002655, 22889.365417, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23114.674000, 23188.159600, 1318.288038, 1318.288038, 0.000000, X, Y) && !ellipse(26561.763400, 24381.354000, 1099.360032, 1099.360032, 0.000000, X, Y) && !ellipse(25636.590000, 26545.840000, 1078.112031, 1078.112031, 0.000000, X, Y) && !ellipse(24461.902000, 21995.050000, 1273.624037, 1273.624037, 0.000000, X, Y) && !ellipse(26815.683807, 24832.180450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26973.994000, 23909.130000, 1182.112034, 1182.112034, 0.000000, X, Y) && !ellipse(24420.052600, 21567.932000, 978.336028, 978.336028, 0.000000, X, Y) && !ellipse(26427.884918, 26397.487488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22064.273911, 24306.171356, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 16:42:54 2012] Writing fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14.gif
[Tue Feb 21 17:11:14 2012] Mean detx,y = (-934.58, 36.60) 
[Tue Feb 21 17:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 17:11:33 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 17:11:33 2012] Setting source spectrum file to fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Feb 21 17:11:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Feb 21 23:33:15 2012] Updating aperture counts using extracted products
[Tue Feb 21 23:33:15 2012] Error reading totcts from fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Feb 21 23:33:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 23:33:16 2012] Using photon index=1.80, rate=0.00838, arf fullrun_mos2_xmm0201510101_pi300-10000_pass1_cl_src14.arf
[Tue Feb 21 23:33:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 23:33:16 2012] Updating source flux to 8.2e-14
[Tue Feb 21 23:38:00 2012] Flag c found in src. 14 procflags, skipping spectral fitting