[Mon Feb 20 10:33:54 2012] Detection parameters:
  Position = (307.0, 285.2) = 4 54 2.67 2 55 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.0 +/- 19.6
  Background counts = 113.1
  Rate = 0.002 +/- 0.0005

[Mon Feb 20 10:33:55 2012] Off-axis axis estimate = 1.15'
[Mon Feb 20 13:20:56 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 13:20:56 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Mon Feb 20 13:20:56 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Mon Feb 20 13:20:56 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.00"
[Mon Feb 20 16:23:23 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35.ximg exists
[Mon Feb 20 16:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35.csv
[Mon Feb 20 16:23:23 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Feb 20 16:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35.csv
[Mon Feb 20 16:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 16:23:25 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Feb 20 16:23:25 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Feb 20 16:23:25 2012] Fit fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Feb 20 19:42:33 2012] Warning, spatial fit 35 centroid is now closest to src. 43
[Mon Feb 20 19:42:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 19:42:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 19:42:33 2012] Assessing source extent using major
[Mon Feb 20 19:42:33 2012] Source does appear to be extended
[Mon Feb 20 19:42:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 19:42:33 2012] Source is confused with source 43
[Mon Feb 20 22:34:04 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 22:34:04 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Mon Feb 20 22:34:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Mon Feb 20 22:34:04 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.00"
[Tue Feb 21 01:24:48 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 01:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 01:24:48 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 01:24:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 01:24:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:24:49 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 01:24:49 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 01:24:49 2012] Fit fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Feb 21 04:11:34 2012] Source 42 is offset by -2.125616 and 5.446529 pixels which is larger than
2 X fitted extent = 0.804864 x 0.804864, not incorporating fit results
[Tue Feb 21 04:11:34 2012] Source 42 is offset by -0.210597 and -1.605011 pixels which is larger than
2 X fitted extent = 0.894230 x 0.894230, not incorporating fit results
[Tue Feb 21 04:11:34 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 04:11:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 04:11:34 2012] Assessing source extent using major
[Tue Feb 21 04:11:34 2012] Source does appear to be extended
[Tue Feb 21 04:11:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:16:26 2012] XMMSAS src. selection expression = ellipse(26664.535645, 24760.022064, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 14:16:26 2012] Writing source region out to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42_src.reg
[Tue Feb 21 14:16:26 2012] Extracting stamp from image fullrun_mos1_xmm0201510101_pi300-10000_cl_sm2.00.img.gz, (270, 248) - (345, 323)
[Tue Feb 21 14:16:26 2012] XMMSAS bgd. selection expression = annulus(26664.535645, 24760.022064, 1087.500000, 2175.000000, X, Y) && !ellipse(25140.246000, 23225.702200, 1220.296035, 1220.296035, 0.000000, X, Y) && !ellipse(24757.484860, 24901.836400, 746.091221, 746.091221, 0.000000, X, Y) && !ellipse(24025.834778, 22493.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.416000, 24435.456000, 1165.208034, 1165.208034, 0.000000, X, Y) && !ellipse(24631.156800, 25602.498000, 1112.296032, 232.280007, 358.882790, X, Y) && !ellipse(25817.308000, 22244.358000, 799.388023, 799.388023, 0.000000, X, Y) && !ellipse(24351.498000, 23216.084000, 1289.168037, 1289.168037, 0.000000, X, Y) && !ellipse(24684.593000, 25246.112000, 1397.288040, 1397.288040, 0.000000, X, Y) && !ellipse(25474.528000, 24436.812000, 704.510420, 704.510420, 0.000000, X, Y) && !ellipse(23322.844800, 23453.618980, 1546.728045, 1546.728045, 0.000000, X, Y) && !ellipse(24845.758000, 26229.344000, 2185.008063, 2185.008063, 0.000000, X, Y) && !ellipse(24698.058990, 22307.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24383.538000, 26916.384000, 1164.872034, 1164.872034, 0.000000, X, Y) && !ellipse(25973.394000, 23091.604000, 1204.952035, 1204.952035, 0.000000, X, Y) && !ellipse(26140.844391, 26038.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23827.948000, 25745.286000, 1203.360035, 1203.360035, 0.000000, X, Y) && !ellipse(26575.276215, 25369.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.645477, 25883.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25292.100600, 27119.752000, 1092.504031, 1092.504031, 0.000000, X, Y)
[Tue Feb 21 14:16:26 2012] Writing fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42.gif
[Tue Feb 21 14:29:36 2012] Mean detx,y = (-260.19, -2125.28) 
[Tue Feb 21 14:29:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 14:29:58 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 14:29:58 2012] Setting source spectrum file to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Feb 21 14:29:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Feb 21 16:33:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 16:33:54 2012] rmf not generated due to insufficient counts
[Tue Feb 21 23:33:13 2012] Updating aperture counts using extracted products
[Tue Feb 21 23:33:13 2012] Error reading totcts from fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Feb 21 23:33:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 23:33:14 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src42.arf
[Tue Feb 21 23:33:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 23:33:14 2012] Updating source flux to 2.5e-14
[Tue Feb 21 23:33:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting