[Mon Feb 20 10:33:53 2012] Detection parameters:
  Position = (284.4, 257.0) = 4 54 9.23 2 53 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.9 +/- 23.7
  Background counts = 138.4
  Rate = 0.004 +/- 0.0005

[Mon Feb 20 10:33:55 2012] Off-axis axis estimate = 3.17'
[Mon Feb 20 13:20:56 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 13:20:56 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon Feb 20 13:20:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Mon Feb 20 13:20:56 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.02"
[Mon Feb 20 16:23:22 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20.ximg exists
[Mon Feb 20 16:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20.csv
[Mon Feb 20 16:23:22 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Feb 20 16:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20.csv
[Mon Feb 20 16:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 16:23:24 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Feb 20 16:23:24 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Feb 20 16:23:24 2012] Fit fullrun_mos1_xmm0201510101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Feb 20 19:42:33 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.117138 pixels away
[Mon Feb 20 19:42:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 19:42:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 19:42:33 2012] Assessing source extent using major
[Mon Feb 20 19:42:33 2012] Source does appear to be extended
[Mon Feb 20 19:42:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 22:34:04 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 22:34:04 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon Feb 20 22:34:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Mon Feb 20 22:34:04 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.02"
[Tue Feb 21 01:24:48 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Feb 21 01:24:48 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Feb 21 01:24:48 2012] Fit fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_src18 appears to have run properly
[Tue Feb 21 01:24:49 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Feb 21 01:24:49 2012] fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Feb 21 01:24:49 2012] Fit fullrun_mos1_xmm0201510101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Feb 21 04:11:34 2012] Warning, spatial fit 18 centroid is now closest to src. 4
[Tue Feb 21 04:11:34 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 04:11:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 04:11:34 2012] Assessing source extent using major
[Tue Feb 21 04:11:34 2012] Source does appear to be extended
[Tue Feb 21 04:11:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:16:26 2012] XMMSAS src. selection expression = ellipse(24698.058990, 22307.717529, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 14:16:26 2012] Writing source region out to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27_src.reg
[Tue Feb 21 14:16:26 2012] Extracting stamp from image fullrun_mos1_xmm0201510101_pi300-10000_cl_sm2.00.img.gz, (247, 219) - (322, 294)
[Tue Feb 21 14:16:26 2012] XMMSAS bgd. selection expression = annulus(24698.058990, 22307.717529, 1087.500000, 2175.000000, X, Y) && !ellipse(25140.246000, 23225.702200, 1220.296035, 1220.296035, 0.000000, X, Y) && !ellipse(24757.484860, 24901.836400, 746.091221, 746.091221, 0.000000, X, Y) && !ellipse(24025.834778, 22493.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.416000, 24435.456000, 1165.208034, 1165.208034, 0.000000, X, Y) && !ellipse(25817.308000, 22244.358000, 799.388023, 799.388023, 0.000000, X, Y) && !ellipse(24351.498000, 23216.084000, 1289.168037, 1289.168037, 0.000000, X, Y) && !ellipse(24684.593000, 25246.112000, 1397.288040, 1397.288040, 0.000000, X, Y) && !ellipse(23168.203120, 25114.955200, 981.704028, 981.704028, 0.000000, X, Y) && !ellipse(25474.528000, 24436.812000, 704.510420, 704.510420, 0.000000, X, Y) && !ellipse(23322.844800, 23453.618980, 1546.728045, 1546.728045, 0.000000, X, Y) && !ellipse(24845.758000, 26229.344000, 2185.008063, 2185.008063, 0.000000, X, Y) && !ellipse(23397.997345, 22564.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22682.804200, 23293.067000, 1297.392037, 861.680025, 162.033000, X, Y) && !ellipse(25973.394000, 23091.604000, 1204.952035, 1204.952035, 0.000000, X, Y) && !ellipse(26664.535645, 24760.022064, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 14:16:26 2012] Writing fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27.gif
[Tue Feb 21 14:25:47 2012] Mean detx,y = (2219.60, -308.26) 
[Tue Feb 21 14:25:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 14:26:02 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 14:26:02 2012] Setting source spectrum file to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Feb 21 14:26:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Feb 21 16:05:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 16:05:38 2012] rmf not generated due to insufficient counts
[Tue Feb 21 23:33:12 2012] Updating aperture counts using extracted products
[Tue Feb 21 23:33:12 2012] Error reading totcts from fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Feb 21 23:33:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 23:33:14 2012] Using photon index=1.80, rate=0.00398, arf fullrun_mos1_xmm0201510101_pi300-10000_pass1_cl_src27.arf
[Tue Feb 21 23:33:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 23:33:14 2012] Updating source flux to 4.1e-14
[Tue Feb 21 23:33:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting