[Tue Apr 10 15:21:36 2012] Detection parameters:
  Position = (290.4, 275.8) = 9 22 2.85 50 58 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 977.8 +/- 39.8
  Background counts = 56.6
  Rate = 0.02 +/- 0.001

[Tue Apr 10 15:21:36 2012] Off-axis axis estimate = 1.74'
[Tue Apr 10 15:21:55 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:21:55 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Apr 10 15:21:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Tue Apr 10 15:21:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Apr 10 15:21:55 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 15:21:56 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 15:21:56 2012] Fit fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Apr 10 15:21:56 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 15:21:56 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:21:56 2012] Fit fullrun_mos1_xmm0201440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:22:07 2012] Spatial fit model total counts = 2061.100000, observed total counts = 2061.000000
[Tue Apr 10 15:22:07 2012] Offset between fit and detection position for source 2 = 0.093205 pixels
[Tue Apr 10 15:22:07 2012] 2073.570000 total counts/ 1057.820000 bgd. counts: snr = 31.230644
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.093205 pixels
  Position = (290.4, 275.9) = 9 22 2.82 50 58 37.1
  Extent = 10.5 (9.6-11.6)", rotation angle = 0
  Source counts = 1015.8 +/- 45.5
  Background counts = 1057.8
  Rate = 0.03 +/- 0.001
[Tue Apr 10 15:22:07 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:22:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:22:07 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:22:07 2012] Source does appear to be extended
[Tue Apr 10 15:22:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:22:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:22:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 15:22:20 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Tue Apr 10 15:22:20 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.882
[Tue Apr 10 15:22:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.51"
[Tue Apr 10 15:22:20 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 15:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:22:20 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 15:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:22:20 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 15:22:20 2012] fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:22:20 2012] Fit fullrun_mos1_xmm0201440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:22:31 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Tue Apr 10 15:22:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:22:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:22:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:22:31 2012] Source does appear to be extended
[Tue Apr 10 15:22:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:22:49 2012] Counts = 1015.750000, rescaling region sizes by 2.000000
[Tue Apr 10 15:22:49 2012] XMMSAS src. selection expression = ellipse(25220.648600, 23952.657600, 1261.428036, 1261.428036, 0.000000, X, Y)
[Tue Apr 10 15:22:49 2012] Not overwriting source region fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 15:22:49 2012] Extracting stamp from image fullrun_mos1_xmm0201440101_pi300-10000_cl_sm2.00.img.gz, (218, 203) - (363, 348)
[Tue Apr 10 15:22:49 2012] XMMSAS bgd. selection expression = annulus(25220.648600, 23952.657600, 4204.760121, 8409.520242, X, Y) && !ellipse(25976.977380, 21071.965400, 432.138412, 432.138412, 0.000000, X, Y) && !ellipse(16220.456192, 29881.666504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16984.942673, 32369.553741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28227.163757, 17903.273499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17136.122696, 29135.186432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19843.308716, 22543.940796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.974000, 22569.290000, 1222.424035, 1222.424035, 0.000000, X, Y)
[Tue Apr 10 15:22:49 2012] Writing fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 15:22:50 2012] ../../xmm0201440101/products/events/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0201440101/products/events/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 15:22:50 2012] Mean detx,y = (319.06, -203.53) 
[Tue Apr 10 15:22:50 2012] ../../xmm0201440101/products/images/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0201440101/products/images/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 15:22:50 2012] ../../xmm0201440101/products/spectra/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0201440101/products/spectra/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 15:22:50 2012] Setting source spectrum file to fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 15:22:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 15:22:50 2012] ../../xmm0201440101/products/lightcurves/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0201440101/products/lightcurves/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 15:22:51 2012] fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Apr 10 15:22:51 2012] fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 15:23:33 2012] Updating aperture counts using extracted products
[Tue Apr 10 15:23:33 2012] Error reading totcts from fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 15:23:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:23:33 2012] Using photon index=1.80, rate=0.0253, arf fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 15:23:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:23:33 2012] Updating source flux to 2.2e-13
[Tue Apr 10 15:23:37 2012] Reading fit data from xmm0201440101/analysis//spectral/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Apr 10 15:23:37 2012] Spectral fit parameter nH value = 4.76422e+20
[Tue Apr 10 15:23:37 2012] Spectral fit parameter PhoIndex value = 2.31815
[Tue Apr 10 15:23:37 2012] Failed to get F(0.3-8.0) from xmm0201440101/analysis//spectral/fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 15:23:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:23:37 2012] Using Nh = 4.8e+20, photon index=2.32, rate=0.0253, arf fullrun_mos1_xmm0201440101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 15:23:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:23:37 2012] Updating source flux to 1.9e-13