[Fri Feb 17 10:21:10 2012] Detection parameters:
  Position = (302.2, 328.3) = 10 54 22.59 -11 42 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 11.5
  Background counts = 22.7
  Rate = 0.003 +/- 0.0006

[Fri Feb 17 10:21:10 2012] Off-axis axis estimate = 2.18'
[Fri Feb 17 10:23:14 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:23:14 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Feb 17 10:23:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.906
[Fri Feb 17 10:23:14 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.52"
[Fri Feb 17 11:18:54 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16.ximg exists
[Fri Feb 17 11:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16.csv
[Fri Feb 17 11:18:54 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Feb 17 11:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16.csv
[Fri Feb 17 11:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:18:55 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Feb 17 11:18:55 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Feb 17 11:18:55 2012] Fit fullrun_pn_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Feb 17 12:36:26 2012] Source 16 is offset by 7.113661 and 6.193007 pixels which is larger than
2 X fitted extent = 1.216428 x 1.216428, not incorporating fit results
[Fri Feb 17 12:36:27 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 12:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 12:36:27 2012] Assessing source extent using major
[Fri Feb 17 12:36:27 2012] Source does appear to be extended
[Fri Feb 17 12:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 12:36:45 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:36:45 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Feb 17 12:36:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.906
[Fri Feb 17 12:36:45 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.52"
[Fri Feb 17 13:27:41 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16.ximg exists
[Fri Feb 17 13:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16.csv
[Fri Feb 17 13:27:41 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Feb 17 13:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16.csv
[Fri Feb 17 13:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 13:27:41 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Feb 17 13:27:41 2012] fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Feb 17 13:27:41 2012] Fit fullrun_pn_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Feb 17 14:29:48 2012] Spatial fit model total counts = 224.997000, observed total counts = 225.000000
[Fri Feb 17 14:29:48 2012] Offset between fit and detection position for source 16 = 0.635635 pixels
[Fri Feb 17 14:29:48 2012] 225.301100 total counts/ 148.523000 bgd. counts: snr = 6.299999
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.635635 pixels
  Position = (302.7, 328.7) = 10 54 22.45 -11 42 23.4
  Extent = 8.6 (6.4-11.8)", rotation angle = 0
  Source counts = 76.8 +/- 15.0
  Background counts = 148.5
  Rate = 0.003 +/- 0.0005
[Fri Feb 17 14:29:48 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 14:29:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 14:29:48 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 14:29:48 2012] Source does appear to be extended
[Fri Feb 17 14:29:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 14:30:06 2012] XMMSAS src. selection expression = ellipse(26286.081200, 28546.292800, 517.711815, 517.711815, 0.000000, X, Y)
[Fri Feb 17 14:30:06 2012] Writing source region out to fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16_src.reg
[Fri Feb 17 14:30:06 2012] Extracting stamp from image fullrun_pn_xmm0201330201_pi300-10000_cl_sm2.00.img.gz, (273, 299) - (332, 358)
[Fri Feb 17 14:30:06 2012] XMMSAS bgd. selection expression = annulus(26286.081200, 28546.292800, 862.853025, 1725.706050, X, Y) && !ellipse(24693.184357, 27818.573334, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 14:30:06 2012] Writing fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16.gif
[Fri Feb 17 14:41:04 2012] Mean detx,y = (-2692.69, 3564.46) 
[Fri Feb 17 14:41:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 14:41:21 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 14:41:21 2012] Setting source spectrum file to fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Feb 17 14:41:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Feb 17 15:09:18 2012] Not generating rmf since there are only 76 counts
[Fri Feb 17 15:09:18 2012] rmf not generated due to insufficient counts
[Fri Feb 17 15:52:42 2012] Updating aperture counts using extracted products
[Fri Feb 17 15:52:42 2012] Error reading totcts from fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Feb 17 15:52:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:52:42 2012] Using photon index=1.80, rate=0.00279, arf fullrun_pn_xmm0201330201_pi300-10000_pass1_cl_src16.arf
[Fri Feb 17 15:52:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 15:52:42 2012] Updating source flux to 1e-14
[Fri Feb 17 15:53:18 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Fri Feb 17 15:53:18 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting