[Fri Feb 17 10:21:33 2012] Detection parameters:
  Position = (227.0, 303.1) = 10 54 44.85 -11 44 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 11.0
  Background counts = 9.1
  Rate = 0.003 +/- 0.0004

[Fri Feb 17 10:21:34 2012] Off-axis axis estimate = 5.19'
[Fri Feb 17 11:18:55 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 11:18:55 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Fri Feb 17 11:18:55 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.132
[Fri Feb 17 11:18:55 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.02"
[Fri Feb 17 11:58:01 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Feb 17 11:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7.csv
[Fri Feb 17 11:58:01 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Feb 17 11:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7.csv
[Fri Feb 17 11:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:58:01 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Feb 17 11:58:01 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Feb 17 11:58:01 2012] Fit fullrun_mos1_xmm0201330201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Feb 17 12:36:31 2012] Spatial fit model total counts = 162.867000, observed total counts = 164.000000
[Fri Feb 17 12:36:31 2012] Offset between fit and detection position for source 10 = 0.161312 pixels
[Fri Feb 17 12:36:31 2012] 160.507900 total counts/ 115.881000 bgd. counts: snr = 4.145631
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.161312 pixels
  Position = (226.9, 303.2) = 10 54 44.89 -11 44 13.9
  Extent = 4.6 (3.4-6.5)", rotation angle = 0
  Source counts = 44.6 +/- 12.7
  Background counts = 115.9
  Rate = 0.001 +/- 0.0004
[Fri Feb 17 12:36:31 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 12:36:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 12:36:31 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 12:36:31 2012] Source does appear to be extended
[Fri Feb 17 12:36:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 13:27:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:27:41 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Fri Feb 17 13:27:41 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.914
[Fri Feb 17 13:27:41 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.65"
[Fri Feb 17 13:57:12 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Feb 17 13:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7.csv
[Fri Feb 17 13:57:12 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Feb 17 13:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7.csv
[Fri Feb 17 13:57:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 13:57:13 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Feb 17 13:57:13 2012] fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Feb 17 13:57:13 2012] Fit fullrun_mos1_xmm0201330201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Feb 17 14:29:52 2012] Spatial fit model total counts = 163.138000, observed total counts = 164.000000
[Fri Feb 17 14:29:52 2012] Offset between fit and detection position for source 10 = 0.006667 pixels
[Fri Feb 17 14:29:52 2012] 160.782100 total counts/ 116.402000 bgd. counts: snr = 4.113467
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.006667 pixels
  Position = (226.9, 303.2) = 10 54 44.89 -11 44 14.0
  Extent = 4.6 (3.4-6.6)", rotation angle = 0
  Source counts = 44.4 +/- 12.7
  Background counts = 116.4
  Rate = 0.001 +/- 0.0004
[Fri Feb 17 14:29:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 14:29:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 14:29:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 14:29:52 2012] Source does appear to be extended
[Fri Feb 17 14:29:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:15:37 2012] XMMSAS src. selection expression = ellipse(19693.883840, 26333.147600, 273.090608, 273.090608, 0.000000, X, Y)
[Fri Feb 17 15:15:37 2012] Writing source region out to fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10_src.reg
[Fri Feb 17 15:15:37 2012] Extracting stamp from image fullrun_mos1_xmm0201330201_pi300-10000_cl_sm2.00.img.gz, (211, 288) - (243, 319)
[Fri Feb 17 15:15:37 2012] XMMSAS bgd. selection expression = annulus(19693.883840, 26333.147600, 455.151013, 910.302026, X, Y) && !ellipse(20775.040802, 24823.639221, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 15:15:37 2012] Writing fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10.gif
[Fri Feb 17 15:16:47 2012] Mean detx,y = (-4798.86, 3857.21) 
[Fri Feb 17 15:16:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:16:55 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:16:55 2012] Setting source spectrum file to fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Feb 17 15:16:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Feb 17 15:29:00 2012] Not generating rmf since there are only 44 counts
[Fri Feb 17 15:29:00 2012] rmf not generated due to insufficient counts
[Fri Feb 17 15:52:43 2012] Updating aperture counts using extracted products
[Fri Feb 17 15:52:43 2012] Error reading totcts from fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Feb 17 15:52:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:52:43 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0201330201_pi300-10000_pass1_cl_src10.arf
[Fri Feb 17 15:52:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 15:52:43 2012] Updating source flux to 2.3e-14
[Fri Feb 17 15:52:45 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting