[Fri Dec 30 11:21:36 2011] Detection parameters:
  Position = (303.4, 321.9) = 9 44 31.80 3 58 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9543.9 +/- 118.7
  Background counts = 184.4
  Rate = 0.3 +/- 0.003

[Fri Dec 30 11:21:37 2011] Off-axis axis estimate = 1.74'
[Fri Dec 30 14:03:02 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 14:03:02 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Dec 30 14:03:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.632
[Fri Dec 30 14:03:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Dec 30 14:40:34 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 14:40:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 14:40:34 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 14:40:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 14:40:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 14:40:34 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 14:40:34 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 14:40:34 2011] Fit fullrun_mos2_xmm0201290301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 14:40:53 2011] Spatial fit model total counts = 5015.730000, observed total counts = 5014.000000
[Fri Dec 30 14:40:53 2011] Offset between fit and detection position for source 3 = 0.452216 pixels
[Fri Dec 30 14:40:53 2011] 4772.840000 total counts/ 1074.250000 bgd. counts: snr = 112.845309
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.452216 pixels
  Position = (303.4, 321.5) = 9 44 31.80 3 58 4.5
  Extent = 4.7 (4.6-4.8)", rotation angle = 0
  Source counts = 3698.6 +/- 69.1
  Background counts = 1074.2
  Rate = 0.2 +/- 0.003
[Fri Dec 30 14:40:53 2011] Spatial fit model total counts = 5004.760000, observed total counts = 5013.000000
[Fri Dec 30 14:40:53 2011] Offset between fit and detection position for source 3 = 0.022986 pixels
[Fri Dec 30 14:40:53 2011] Warning, changing simple spatial fit ID from 1 to 3
[Fri Dec 30 14:40:53 2011] 5028.600000 total counts/ 1352.880000 bgd. counts: snr = 99.933888
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.022986 pixels
  Position = (303.4, 321.5) = 9 44 31.81 3 58 4.6
  Extent = 4.7 (4.5-4.8)", rotation angle = 0
  Source counts = 3675.7 +/- 70.9
  Background counts = 1352.9
  Rate = 0.2 +/- 0.003
[Fri Dec 30 14:40:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 14:40:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 14:40:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 14:40:53 2011] Source does appear to be extended
[Fri Dec 30 14:40:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 14:40:53 2011] Source is confused with source 1
[Fri Dec 30 16:46:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:46:26 2011] Initial guess for spatial extent in simple fitting = 4.69"
[Fri Dec 30 16:46:26 2011] source mask rpix=1.1, npix_max = 9, mask sum = 5, frac = 0.501
[Fri Dec 30 16:46:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.69"
[Fri Dec 30 17:20:44 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 17:20:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 17:20:44 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 17:20:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 17:20:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:20:44 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 17:20:44 2011] fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 17:20:44 2011] Fit fullrun_mos2_xmm0201290301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 17:21:02 2011] Warning, spatial fit 1 centroid is now closest to src. 1
[Fri Dec 30 17:21:02 2011] Spatial fit model total counts = 5023.440000, observed total counts = 5013.000000
[Fri Dec 30 17:21:02 2011] Offset between fit and detection position for source 3 = 0.006488 pixels
[Fri Dec 30 17:21:02 2011] Warning, changing simple spatial fit ID from 1 to 3
[Fri Dec 30 17:21:02 2011] 5090.880000 total counts/ 1400.380000 bgd. counts: snr = 98.619378
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006488 pixels
  Position = (303.4, 321.5) = 9 44 31.81 3 58 4.6
  Extent = 4.7 (4.6-4.8)", rotation angle = 0
  Source counts = 3690.5 +/- 71.4
  Background counts = 1400.4
  Rate = 0.2 +/- 0.003
[Fri Dec 30 17:21:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:21:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:21:02 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:21:02 2011] Source does appear to be extended
[Fri Dec 30 17:21:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 20:07:16 2011] Counts = 3690.500000, rescaling region sizes by 2.000000
[Fri Dec 30 20:07:16 2011] XMMSAS src. selection expression = ellipse(26346.949200, 27920.786200, 563.497216, 563.497216, 0.000000, X, Y)
[Fri Dec 30 20:07:16 2011] Writing source region out to fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 30 20:07:16 2011] Extracting stamp from image fullrun_mos2_xmm0201290301_pi300-10000_cl_sm2.00.img.gz, (271, 289) - (336, 354)
[Fri Dec 30 20:07:16 2011] XMMSAS bgd. selection expression = annulus(26346.949200, 27920.786200, 1878.324054, 3756.648108, X, Y) && !ellipse(26349.968400, 27914.572200, 360.516810, 360.516810, 0.000000, X, Y) && !ellipse(24467.746460, 29707.347200, 388.147211, 388.147211, 0.000000, X, Y) && !ellipse(25190.123535, 27227.638153, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 20:07:16 2011] Writing fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3.gif
[Fri Dec 30 20:07:21 2011] Mean detx,y = (120.22, 121.34) 
[Fri Dec 30 20:07:23 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:07:42 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:07:42 2011] Setting source spectrum file to fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 30 20:07:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 30 20:33:11 2011] Updating aperture counts using extracted products
[Fri Dec 30 20:33:11 2011] Error reading totcts from fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 30 20:33:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 20:33:12 2011] Using photon index=1.80, rate=0.176, arf fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3.arf
[Fri Dec 30 20:33:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 20:33:12 2011] Updating source flux to 1.9e-12
[Fri Dec 30 20:33:48 2011] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Dec 30 20:34:31 2011] Reading fit data from xmm0201290301/analysis//spectral/fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_pl.csv
[Fri Dec 30 20:34:31 2011] Spectral fit parameter nH value = 7.14878e+20
[Fri Dec 30 20:34:31 2011] Spectral fit parameter PhoIndex value = 1.90862
[Fri Dec 30 20:34:31 2011] Failed to get F(0.3-8.0) from xmm0201290301/analysis//spectral/fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 20:34:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 20:34:31 2011] Using Nh = 7.1e+20, photon index=1.91, rate=0.176, arf fullrun_mos2_xmm0201290301_pi300-10000_pass1_cl_src3.arf
[Fri Dec 30 20:34:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 20:34:31 2011] Updating source flux to 1.9e-12