[Fri May 3 00:22:56 2013] Detection parameters: Position = (143.0, 392.2) = 5 13 0.04 -32 33 47.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 45.5 +/- 10.3 Background counts = 16.9 Rate = 0.002 +/- 0.0004 [Fri May 3 00:22:57 2013] Off-axis axis estimate = 13.16' [Fri May 3 00:23:13 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting [Fri May 3 00:23:13 2013] Initial guess for spatial extent in simple fitting = 13.01" [Fri May 3 00:23:13 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006 [Fri May 3 00:23:13 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.01" [Fri May 3 00:23:13 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24.ximg exists [Fri May 3 00:23:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24.csv [Fri May 3 00:23:13 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24_1.ximg exists [Fri May 3 00:23:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24.csv [Fri May 3 00:23:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 00:23:13 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Fri May 3 00:23:13 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Fri May 3 00:23:13 2013] Fit fullrun_mos2_xmm0201290201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Fri May 3 00:23:23 2013] Source 5 is offset by -4.793041 and 7.362095 pixels which is larger than 2 X fitted extent = 1.478897 x 1.478897, not incorporating fit results [Fri May 3 00:23:23 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.994456 pixels away [Fri May 3 00:23:23 2013] Vigneting correction estimate = 1.000000 [Fri May 3 00:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 00:23:23 2013] Assessing source extent using major [Fri May 3 00:23:23 2013] Source does appear to be extended [Fri May 3 00:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 00:23:31 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting [Fri May 3 00:23:31 2013] Initial guess for spatial extent in simple fitting = 13.01" [Fri May 3 00:23:31 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006 [Fri May 3 00:23:31 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.01" [Fri May 3 00:23:32 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23.ximg exists [Fri May 3 00:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23.csv [Fri May 3 00:23:32 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23_1.ximg exists [Fri May 3 00:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23.csv [Fri May 3 00:23:32 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 00:23:32 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Fri May 3 00:23:32 2013] fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Fri May 3 00:23:32 2013] Fit fullrun_mos2_xmm0201290201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Fri May 3 00:23:40 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.359612 pixels away [Fri May 3 00:23:41 2013] Vigneting correction estimate = 1.000000 [Fri May 3 00:23:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 00:23:41 2013] Assessing source extent using major [Fri May 3 00:23:41 2013] Source does appear to be extended [Fri May 3 00:23:41 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 00:45:49 2013] XMMSAS src. selection expression = ellipse(12395.817459, 34072.314301, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 3 00:45:49 2013] Writing source region out to fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_src.reg [Fri May 3 00:45:49 2013] Extracting stamp from image fullrun_mos2_xmm0201290201_pi300-10000_cl_sm2.00.img.gz, (106, 355) - (181, 430) [Fri May 3 00:45:49 2013] XMMSAS bgd. selection expression = annulus(12395.817459, 34072.314301, 1087.500000, 2175.000000, X, Y) && !ellipse(14820.922546, 36673.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13177.616800, 33523.196180, 307.441609, 307.441609, 0.000000, X, Y) && !ellipse(11863.905600, 32342.920800, 337.068810, 337.068810, 0.000000, X, Y) [Fri May 3 00:45:49 2013] Writing fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5.gif [Fri May 3 00:51:51 2013] Mean detx,y = (-14269.59, -4825.00) [Fri May 3 00:51:52 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 3 00:52:04 2013] Binned source spectrum to 10 counts/bin [Fri May 3 00:52:04 2013] Setting source spectrum file to fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Fri May 3 00:52:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_bgd.pi.gz [Fri May 3 00:57:47 2013] Not generating rmf since there are only 45 counts [Fri May 3 00:57:47 2013] rmf not generated due to insufficient counts [Fri May 3 00:58:40 2013] Updating aperture counts using extracted products [Fri May 3 00:58:40 2013] Total counts from fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 109.00 [Fri May 3 00:58:40 2013] Total counts from fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 631.00 [Fri May 3 00:58:40 2013] Got source and background scale factors 1344000.000000, 9963203.000000 [Fri May 3 00:58:40 2013] User source parameters: Position = (143.0, 392.2) = 5 13 0.04 -32 33 47.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 23.9 +/- 11.5 Background aperture counts = 85.1 Rate = 0.0009 +/- 0.0004 [Fri May 3 00:58:40 2013] Updating counts from extracted products [Fri May 3 00:58:40 2013] Set source signif. to 23.88/9.23 = 2.59 [Fri May 3 00:58:40 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 00:58:40 2013] Using photon index=1.80, rate=0.000911, arf fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5.arf [Fri May 3 00:58:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 3 00:58:40 2013] Updating source flux to 2.1e-14 [Fri May 3 00:58:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 00:58:44 2013] xmm0201290201/analysis//spectral/fullrun_mos2_xmm0201290201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete