[Mon Mar 19 02:58:12 2012] Detection parameters:
  Position = (329.7, 340.8) = 18 9 44.40 -23 30 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 20.0
  Background counts = 141.7
  Rate = 0.001 +/- 0.0003

[Mon Mar 19 02:58:13 2012] Off-axis axis estimate = 3.82'
[Mon Mar 19 05:31:57 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 05:31:57 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Mon Mar 19 05:31:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Mon Mar 19 05:31:57 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.34"
[Mon Mar 19 07:38:45 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47.ximg exists
[Mon Mar 19 07:38:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47.csv
[Mon Mar 19 07:38:45 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon Mar 19 07:38:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47.csv
[Mon Mar 19 07:38:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 07:38:46 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon Mar 19 07:38:46 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Mar 19 07:38:46 2012] Fit fullrun_mos2_xmm0201270101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Mon Mar 19 07:39:04 2012] Source 38 is offset by 9.126765 and 1.429266 pixels which is larger than
2 X fitted extent = 0.922920 x 0.922920, not incorporating fit results
[Mon Mar 19 07:39:04 2012] Source 38 is offset by 5.296742 and 6.480162 pixels which is larger than
2 X fitted extent = 0.958441 x 0.958441, not incorporating fit results
[Mon Mar 19 07:39:04 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 07:39:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 07:39:04 2012] Assessing source extent using major
[Mon Mar 19 07:39:04 2012] Source does appear to be extended
[Mon Mar 19 07:39:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 07:39:04 2012] Source is confused with source 19
[Mon Mar 19 09:22:02 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 09:22:02 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Mon Mar 19 09:22:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Mon Mar 19 09:22:02 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 8.34"
[Mon Mar 19 13:01:35 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47.ximg exists
[Mon Mar 19 13:01:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47.csv
[Mon Mar 19 13:01:35 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Mar 19 13:01:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47.csv
[Mon Mar 19 13:01:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 13:01:36 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Mar 19 13:01:36 2012] fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Mar 19 13:01:36 2012] Fit fullrun_mos2_xmm0201270101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Mar 19 13:02:09 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 10.314914 pixels away
[Mon Mar 19 13:02:09 2012] Source 38 is offset by 5.306742 and 6.480162 pixels which is larger than
2 X fitted extent = 0.958441 x 0.958441, not incorporating fit results
[Mon Mar 19 13:02:09 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 13:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 13:02:09 2012] Assessing source extent using major
[Mon Mar 19 13:02:09 2012] Source does appear to be extended
[Mon Mar 19 13:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 15:32:15 2012] XMMSAS src. selection expression = ellipse(28639.176514, 29602.198120, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 15:32:15 2012] Writing source region out to fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38_src.reg
[Mon Mar 19 15:32:15 2012] Extracting stamp from image fullrun_mos2_xmm0201270101_pi300-10000_cl_sm2.00.img.gz, (292, 303) - (367, 378)
[Mon Mar 19 15:32:15 2012] XMMSAS bgd. selection expression = annulus(28639.176514, 29602.198120, 1087.500000, 2175.000000, X, Y) && !ellipse(27060.225400, 27638.152000, 396.604011, 396.604011, 0.000000, X, Y) && !ellipse(27978.676910, 27381.329834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28930.040283, 28473.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.296967, 27963.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.565247, 27681.982697, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 15:32:15 2012] Writing fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38.gif
[Mon Mar 19 15:59:05 2012] Mean detx,y = (-1445.36, 2081.17) 
[Mon Mar 19 15:59:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 15:59:25 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 15:59:25 2012] Setting source spectrum file to fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Mar 19 15:59:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Mar 19 16:45:43 2012] Not generating rmf since there are only 83 counts
[Mon Mar 19 16:45:43 2012] rmf not generated due to insufficient counts
[Mon Mar 19 16:47:45 2012] Updating aperture counts using extracted products
[Mon Mar 19 16:47:45 2012] Error reading totcts from fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Mar 19 16:47:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 16:47:47 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos2_xmm0201270101_pi300-10000_pass1_cl_src38.arf
[Mon Mar 19 16:47:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 16:47:47 2012] Updating source flux to 1.4e-14
[Mon Mar 19 16:51:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting