[Tue May 14 03:01:13 2013] Detection parameters:
  Position = (380.6, 287.4) = 21 43 51.98 28 8 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.8 +/- 13.2
  Background counts = 40.9
  Rate = 0.003 +/- 0.0005

[Tue May 14 03:01:14 2013] Off-axis axis estimate = 6.01'
[Tue May 14 03:05:11 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:05:11 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Tue May 14 03:05:11 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.878
[Tue May 14 03:05:11 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.43"
[Tue May 14 04:09:00 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_src25.ximg exists
[Tue May 14 04:09:00 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue May 14 04:09:00 2013] Fit fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_src25 appears to have run properly
[Tue May 14 04:09:01 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue May 14 04:09:01 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue May 14 04:09:01 2013] Fit fullrun_pn_xmm0201230101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue May 14 05:07:51 2013] Spatial fit model total counts = 421.162000, observed total counts = 388.000000
[Tue May 14 05:07:51 2013] Offset between fit and detection position for source 25 = 0.160273 pixels
[Tue May 14 05:07:51 2013] 418.431000 total counts/ 359.576000 bgd. counts: snr = 3.103759
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.160273 pixels
  Position = (380.7, 287.4) = 21 43 51.93 28 8 51.3
  Extent = 6.4 (4.6-9.7)", rotation angle = 0
  Source counts = 58.9 +/- 20.5
  Background counts = 359.6
  Rate = 0.002 +/- 0.0007
[Tue May 14 05:07:51 2013] Vigneting correction estimate = 1.000000
[Tue May 14 05:07:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 05:07:51 2013] Assessing source extent using major axis lower bound
[Tue May 14 05:07:51 2013] Source does appear to be extended
[Tue May 14 05:07:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 05:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 05:08:13 2013] Initial guess for spatial extent in simple fitting = 6.43"
[Tue May 14 05:08:13 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Tue May 14 05:08:13 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 6.43"
[Tue May 14 06:01:35 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 14 06:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24.csv
[Tue May 14 06:01:35 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 14 06:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24.csv
[Tue May 14 06:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 06:01:36 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 14 06:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 14 06:01:36 2013] fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 14 06:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 14 06:01:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201230101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 06:52:05 2013] Warning, spatial fit 24 centroid is now closest to src. 24
[Tue May 14 06:52:05 2013] Vigneting correction estimate = 1.000000
[Tue May 14 06:52:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 06:52:05 2013] Assessing source extent using major axis lower bound
[Tue May 14 06:52:05 2013] Source does appear to be extended
[Tue May 14 06:52:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 06:52:30 2013] XMMSAS src. selection expression = ellipse(33076.252200, 24951.898000, 385.759211, 385.759211, 0.000000, X, Y)
[Tue May 14 06:52:30 2013] Writing source region out to fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_src.reg
[Tue May 14 06:52:30 2013] Extracting stamp from image fullrun_pn_xmm0201230101_pi300-10000_cl_sm2.00.img.gz, (359, 265) - (403, 310)
[Tue May 14 06:52:30 2013] XMMSAS bgd. selection expression = annulus(33076.252200, 24951.898000, 642.932019, 1285.864037, X, Y) && !ellipse(32358.607056, 26771.968750, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 06:52:30 2013] Writing fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25.gif
[Tue May 14 07:10:22 2013] Mean detx,y = (5440.68, -1705.85) 
[Tue May 14 07:10:24 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 07:10:40 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 07:10:41 2013] Setting source spectrum file to fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May 14 07:10:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue May 14 07:32:39 2013] Not generating rmf since there are only 58 counts
[Tue May 14 07:32:39 2013] rmf not generated due to insufficient counts
[Tue May 14 08:15:22 2013] Updating aperture counts using extracted products
[Tue May 14 08:15:22 2013] Total counts from fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 142.00
[Tue May 14 08:15:22 2013] Total counts from fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 580.00
[Tue May 14 08:15:22 2013] Got source and background scale factors 470400.000000, 3204294.000000
[Tue May 14 08:15:22 2013] User source parameters:
  Position = (380.7, 287.4) = 21 43 51.93 28 8 51.3
  Extent = 6.4 (4.6-9.7)", rotation angle = 0
  Source aperture counts = 56.9 +/- 12.9
  Background aperture counts = 85.1
  Rate = 0.002 +/- 0.0004

[Tue May 14 08:15:25 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 08:15:25 2013] Using photon index=1.80, rate=0.00198, arf fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25.arf
[Tue May 14 08:15:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 08:15:25 2013] Updating source flux to 8.4e-15
[Tue May 14 08:15:39 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 08:15:42 2013] xmm0201230101/analysis//spectral/fullrun_pn_xmm0201230101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete