[Thu Mar 29 22:06:41 2012] Detection parameters:
  Position = (298.8, 365.3) = 17 44 41.11 -27 7 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 11.1
  Background counts = 24.5
  Rate = 0.003 +/- 0.0009

[Thu Mar 29 22:06:42 2012] Off-axis axis estimate = 4.84'
[Thu Mar 29 23:20:16 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:20:16 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Thu Mar 29 23:20:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Thu Mar 29 23:20:16 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.85"
[Fri Mar 30 06:04:16 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src66.ximg exists
[Fri Mar 30 06:04:16 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src66_1.ximg exists
[Fri Mar 30 06:04:16 2012] Fit fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src66 appears to have run properly
[Fri Mar 30 06:04:19 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Fri Mar 30 06:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri Mar 30 06:04:19 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Fri Mar 30 06:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri Mar 30 06:04:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:04:57 2012] Source 50 is offset by -2.324586 and -4.455099 pixels which is larger than
2 X fitted extent = 8.138621 x 2.099356, not incorporating fit results
[Fri Mar 30 06:04:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:04:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:04:58 2012] Assessing source extent using major
[Fri Mar 30 06:04:58 2012] Source does appear to be extended
[Fri Mar 30 06:04:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:04:58 2012] Source is confused with source 47
[Fri Mar 30 06:46:52 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:46:52 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Fri Mar 30 06:46:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Fri Mar 30 06:46:52 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 8.85"
[Fri Mar 30 13:14:38 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src64.ximg exists
[Fri Mar 30 13:14:38 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Mar 30 13:14:38 2012] Fit fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src64 appears to have run properly
[Fri Mar 30 13:14:41 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Mar 30 13:14:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Mar 30 13:14:41 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Mar 30 13:14:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Mar 30 13:14:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 13:15:17 2012] Source 50 is offset by -3.504724 and -6.171811 pixels which is larger than
2 X fitted extent = 2.051347 x 2.051347, not incorporating fit results
[Fri Mar 30 13:15:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 13:15:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 13:15:17 2012] Assessing source extent using major
[Fri Mar 30 13:15:17 2012] Source does appear to be extended
[Fri Mar 30 13:15:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 14:37:13 2012] XMMSAS src. selection expression = ellipse(25950.269043, 31728.608429, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 14:37:13 2012] Writing source region out to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50_src.reg
[Fri Mar 30 14:37:13 2012] Extracting stamp from image fullrun_mos2_xmm0201200101_pi300-10000_cl_sm2.00.img.gz, (261, 328) - (336, 403)
[Fri Mar 30 14:37:13 2012] XMMSAS bgd. selection expression = annulus(25950.269043, 31728.608429, 1087.500000, 2175.000000, X, Y) && !ellipse(23972.069200, 35530.750400, 1672.240048, 209.030406, 109.831500, X, Y) && !ellipse(26257.833600, 32267.370200, 349.643210, 349.643210, 0.000000, X, Y) && !ellipse(24365.359924, 33398.990906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23450.148940, 31696.894800, 362.567210, 362.567210, 0.000000, X, Y) && !ellipse(27628.143940, 32972.732600, 591.542417, 591.542417, 0.000000, X, Y) && !ellipse(27173.191467, 34066.961761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.024340, 33010.904400, 537.002415, 537.002415, 0.000000, X, Y)
[Fri Mar 30 14:37:13 2012] Writing fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50.gif
[Fri Mar 30 15:12:03 2012] Mean detx,y = (1211.82, -7503.23) 
[Fri Mar 30 15:12:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 15:12:43 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 15:12:43 2012] Setting source spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Mar 30 15:12:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Mar 30 17:05:56 2012] Not generating rmf since there are only 43 counts
[Fri Mar 30 17:05:56 2012] rmf not generated due to insufficient counts
[Fri Mar 30 17:24:33 2012] Updating aperture counts using extracted products
[Fri Mar 30 17:24:33 2012] Error reading totcts from fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Mar 30 17:24:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 17:24:39 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src50.arf
[Fri Mar 30 17:24:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 17:24:39 2012] Updating source flux to 4.7e-14
[Fri Mar 30 17:25:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting