[Thu Mar 29 22:06:41 2012] Detection parameters:
  Position = (280.6, 384.5) = 17 44 47.04 -27 6 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 11.5
  Background counts = 21.6
  Rate = 0.006 +/- 0.001

[Thu Mar 29 22:06:42 2012] Off-axis axis estimate = 6.37'
[Thu Mar 29 23:20:16 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:20:16 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Thu Mar 29 23:20:16 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.851
[Thu Mar 29 23:20:16 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.61"
[Fri Mar 30 06:04:14 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Mar 30 06:04:14 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Mar 30 06:04:14 2012] Fit fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Mar 30 06:04:17 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Mar 30 06:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Mar 30 06:04:17 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Mar 30 06:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Mar 30 06:04:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:04:57 2012] Warning, spatial fit 28 centroid is now closest to src. 45
[Fri Mar 30 06:04:57 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 11.660917 pixels away
[Fri Mar 30 06:04:57 2012] Source 40 is offset by 2.212620 and 4.706585 pixels which is larger than
2 X fitted extent = 1.432740 x 1.432740, not incorporating fit results
[Fri Mar 30 06:04:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:04:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:04:58 2012] Assessing source extent using major
[Fri Mar 30 06:04:58 2012] Source does appear to be extended
[Fri Mar 30 06:04:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:46:52 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:46:52 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Mar 30 06:46:52 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.851
[Fri Mar 30 06:46:52 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.61"
[Fri Mar 30 13:14:37 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Mar 30 13:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 13:14:37 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Mar 30 13:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27.csv
[Fri Mar 30 13:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 13:14:40 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Mar 30 13:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Mar 30 13:14:40 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Mar 30 13:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Mar 30 13:14:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 13:15:17 2012] Spatial fit model total counts = 267.099000, observed total counts = 221.000000
[Fri Mar 30 13:15:17 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 13:15:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 13:15:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 13:15:17 2012] Assessing source extent using major
[Fri Mar 30 13:15:17 2012] Source does appear to be extended
[Fri Mar 30 13:15:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 14:37:11 2012] XMMSAS src. selection expression = ellipse(24365.359924, 33398.990906, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 14:37:11 2012] Writing source region out to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40_src.reg
[Fri Mar 30 14:37:11 2012] Extracting stamp from image fullrun_mos2_xmm0201200101_pi300-10000_cl_sm2.00.img.gz, (243, 347) - (318, 422)
[Fri Mar 30 14:37:11 2012] XMMSAS bgd. selection expression = annulus(24365.359924, 33398.990906, 1087.500000, 2175.000000, X, Y) && !ellipse(21222.784312, 34965.227218, 1553.351459, 229.468185, 124.694113, X, Y) && !ellipse(23972.069200, 35530.750400, 1672.240048, 209.030406, 109.831500, X, Y) && !ellipse(22725.108000, 34797.735800, 631.304018, 243.382407, 293.603500, X, Y) && !ellipse(25362.496002, 35976.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.833600, 32267.370200, 349.643210, 349.643210, 0.000000, X, Y) && !ellipse(25122.574280, 35360.760193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23450.148940, 31696.894800, 362.567210, 362.567210, 0.000000, X, Y) && !ellipse(22785.880341, 33091.429657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.159200, 35383.397200, 407.281612, 407.281612, 0.000000, X, Y) && !ellipse(24123.478790, 35916.194977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22087.894000, 31916.140000, 1477.240043, 1477.240043, 0.000000, X, Y) && !ellipse(27173.191467, 34066.961761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.024340, 33010.904400, 537.002415, 537.002415, 0.000000, X, Y) && !ellipse(25950.269043, 31728.608429, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 14:37:11 2012] Writing fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40.gif
[Fri Mar 30 14:53:28 2012] Mean detx,y = (-419.55, -9068.27) 
[Fri Mar 30 14:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 14:53:59 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 14:53:59 2012] Setting source spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Mar 30 14:53:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Mar 30 16:13:21 2012] Not generating rmf since there are only 71 counts
[Fri Mar 30 16:13:21 2012] rmf not generated due to insufficient counts
[Fri Mar 30 17:24:31 2012] Updating aperture counts using extracted products
[Fri Mar 30 17:24:31 2012] Error reading totcts from fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Mar 30 17:24:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 17:24:36 2012] Using photon index=1.80, rate=0.00609, arf fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src40.arf
[Fri Mar 30 17:24:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 17:24:36 2012] Updating source flux to 1.3e-13
[Fri Mar 30 17:25:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting