[Thu Mar 29 22:06:39 2012] Detection parameters:
  Position = (289.1, 454.0) = 17 44 44.28 -27 1 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 11.8
  Background counts = 14.4
  Rate = 0.004 +/- 0.0007

[Thu Mar 29 22:06:42 2012] Off-axis axis estimate = 11.30'
[Thu Mar 29 23:20:16 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:20:16 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Thu Mar 29 23:20:16 2012] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.815
[Thu Mar 29 23:20:16 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 12.08"
[Fri Mar 30 06:04:15 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52.ximg exists
[Fri Mar 30 06:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52.csv
[Fri Mar 30 06:04:15 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Mar 30 06:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52.csv
[Fri Mar 30 06:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 06:04:18 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Mar 30 06:04:18 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Mar 30 06:04:18 2012] Fit fullrun_mos2_xmm0201200101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Mar 30 06:04:57 2012] Source 2 is offset by -1.500472 and -2.237789 pixels which is larger than
2 X fitted extent = 1.404887 x 1.404887, not incorporating fit results
[Fri Mar 30 06:04:57 2012] Spatial fit model total counts = 371.627000, observed total counts = 350.000000
[Fri Mar 30 06:04:57 2012] Offset between fit and detection position for source 2 = 0.169612 pixels
[Fri Mar 30 06:04:57 2012] 320.453000 total counts/ 275.324000 bgd. counts: snr = 2.719779
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.169612 pixels
  Position = (289.1, 453.8) = 17 44 44.29 -27 1 3.5
  Extent = 4.3 (3.2-5.7)", rotation angle = 0
  Source counts = 45.1 +/- 17.9
  Background counts = 275.3
  Rate = 0.003 +/- 0.001
[Fri Mar 30 06:04:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 06:04:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 06:04:58 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 06:04:58 2012] Source does appear to be extended
[Fri Mar 30 06:04:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 06:04:58 2012] Source is confused with source 3
[Fri Mar 30 06:46:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 06:46:52 2012] Initial guess for spatial extent in simple fitting = 4.34"
[Fri Mar 30 06:46:52 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.002
[Fri Mar 30 06:46:52 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 4.34"
[Fri Mar 30 13:14:38 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50.ximg exists
[Fri Mar 30 13:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50.csv
[Fri Mar 30 13:14:38 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Mar 30 13:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50.csv
[Fri Mar 30 13:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 13:14:40 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Mar 30 13:14:41 2012] fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Mar 30 13:14:41 2012] Fit fullrun_mos2_xmm0201200101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Fri Mar 30 13:15:17 2012] Spatial fit model total counts = 295.812000, observed total counts = 272.000000
[Fri Mar 30 13:15:17 2012] Offset between fit and detection position for source 2 = 0.029281 pixels
[Fri Mar 30 13:15:17 2012] 290.468400 total counts/ 244.383000 bgd. counts: snr = 2.948003
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.029281 pixels
  Position = (289.1, 453.8) = 17 44 44.30 -27 1 3.6
  Extent = 4.1 (3.2-5.9)", rotation angle = 0
  Source counts = 46.1 +/- 17.0
  Background counts = 244.4
  Rate = 0.003 +/- 0.001
[Fri Mar 30 13:15:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 13:15:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 13:15:17 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 13:15:17 2012] Source does appear to be extended
[Fri Mar 30 13:15:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 14:37:12 2012] XMMSAS src. selection expression = ellipse(25099.011160, 39433.645200, 243.498007, 243.498007, 0.000000, X, Y)
[Fri Mar 30 14:37:12 2012] Writing source region out to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2_src.reg
[Fri Mar 30 14:37:12 2012] Extracting stamp from image fullrun_mos2_xmm0201200101_pi300-10000_cl_sm2.00.img.gz, (275, 440) - (303, 468)
[Fri Mar 30 14:37:12 2012] XMMSAS bgd. selection expression = annulus(25099.011160, 39433.645200, 405.830012, 811.660023, X, Y) && !ellipse(24317.503052, 39595.593174, 2013.112768, 253.736007, 98.923403, X, Y) && !ellipse(24372.347740, 39918.774800, 246.220007, 246.220007, 0.000000, X, Y) && !ellipse(26296.370400, 40786.787200, 2029.888058, 253.736007, 94.728980, X, Y) && !ellipse(25242.116974, 40666.992889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26249.408539, 40323.540955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.117200, 41085.474000, 1306.144038, 1306.144038, 0.000000, X, Y) && !ellipse(25086.867200, 39544.024000, 670.990419, 670.990419, 0.000000, X, Y)
[Fri Mar 30 14:37:12 2012] Writing fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2.gif
[Fri Mar 30 15:02:46 2012] Mean detx,y = (334.90, -15147.56) 
[Fri Mar 30 15:02:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 15:03:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 15:03:01 2012] Setting source spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 30 15:03:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar 30 16:34:38 2012] Not generating rmf since there are only 46 counts
[Fri Mar 30 16:34:38 2012] rmf not generated due to insufficient counts
[Fri Mar 30 17:24:32 2012] Updating aperture counts using extracted products
[Fri Mar 30 17:24:32 2012] Error reading totcts from fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 30 17:24:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 17:24:37 2012] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0201200101_pi300-10000_pass1_cl_src2.arf
[Fri Mar 30 17:24:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 17:24:38 2012] Updating source flux to 1.1e-13
[Fri Mar 30 17:25:23 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Fri Mar 30 17:25:23 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Mar 30 17:25:23 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting