[Thu Jul  5 05:38:45 2012] Detection parameters:
  Position = (473.0, 411.8) = 2 17 34.58 57 15 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.0 +/- 16.7
  Background counts = 30.1
  Rate = 0.004 +/- 0.0004

[Thu Jul  5 05:38:45 2012] Off-axis axis estimate = 15.09'
[Thu Jul  5 05:41:10 2012] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 05:41:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 05:41:10 2012] Initial guess for spatial extent in simple fitting = 13.97"
[Thu Jul  5 05:41:10 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.161
[Thu Jul  5 05:41:10 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.97"
[Thu Jul  5 07:05:57 2012] fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul  5 07:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6.csv
[Thu Jul  5 07:05:57 2012] fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul  5 07:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6.csv
[Thu Jul  5 07:05:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 07:05:58 2012] fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul  5 07:05:58 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul  5 07:05:58 2012] fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul  5 07:05:58 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul  5 07:05:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:26:13 2012] Spatial fit model total counts = 1430.100000, observed total counts = 1421.000000
[Thu Jul  5 08:26:13 2012] Offset between fit and detection position for source 6 = 0.994750 pixels
[Thu Jul  5 08:26:13 2012] Warning, changing simple spatial fit ID from 6 to 3
[Thu Jul  5 08:26:13 2012] 1454.750000 total counts/ 1454.750000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.994750 pixels
  Position = (472.8, 412.8) = 2 17 34.68 57 15 59.5
  Extent = 3.3" x 3.3", rotation angle = 0
  Source counts = 0.0 +/- 38.1
  Background counts = 1454.8
  Rate = 6e-22 +/- 0.001
  Deleting source due to low Poisson probability