[Thu Jul  5 05:39:29 2012] Detection parameters:
  Position = (374.6, 186.0) = 2 18 27.66 56 59 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 12.0
  Background counts = 11.1
  Rate = 0.004 +/- 0.0006

[Thu Jul  5 05:39:29 2012] Off-axis axis estimate = 9.85'
[Thu Jul  5 07:43:22 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:43:22 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Thu Jul  5 07:43:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.086
[Thu Jul  5 07:43:22 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.35"
[Thu Jul  5 08:26:02 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  5 08:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 08:26:02 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  5 08:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 08:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:26:02 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  5 08:26:02 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  5 08:26:02 2012] Fit fullrun_mos2_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul  5 08:26:22 2012] Spatial fit model total counts = 258.312000, observed total counts = 261.000000
[Thu Jul  5 08:26:22 2012] Offset between fit and detection position for source 45 = 7.180648 pixels
[Thu Jul  5 08:26:22 2012] 210.755220 total counts/ 3.321220 bgd. counts: snr = 113.823286
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 7.180648 pixels
  Position = (378.4, 192.1) = 2 18 25.60 57 0 1.0
  Extent = 22.7 (22.7-22.7)", rotation angle = 0
  Source counts = 207.4 +/- 14.5
  Background counts = 3.3
  Rate = 0.005 +/- 0.0004
[Thu Jul  5 08:26:22 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:26:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:26:22 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:26:22 2012] Source does appear to be extended
[Thu Jul  5 08:26:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 10:17:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:17:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 10:17:01 2012] Initial guess for spatial extent in simple fitting = 22.70"
[Thu Jul  5 10:17:01 2012] source mask rpix=5.2, npix_max = 130, mask sum = 132, frac = 1.009
[Thu Jul  5 10:17:01 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 22.70"
[Thu Jul  5 11:13:33 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jul  5 11:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 11:13:33 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jul  5 11:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 11:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 11:13:33 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jul  5 11:13:33 2012] fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jul  5 11:13:33 2012] Fit fullrun_mos2_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jul  5 11:13:59 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 17.651240 pixels away
[Thu Jul  5 11:13:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 11:13:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 11:13:59 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 11:13:59 2012] Source does appear to be extended
[Thu Jul  5 11:13:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:10:59 2012] XMMSAS src. selection expression = ellipse(32876.212000, 16660.164000, 1361.802039, 1361.802039, 0.000000, X, Y)
[Thu Jul  5 13:10:59 2012] Writing source region out to fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45_src.reg
[Thu Jul  5 13:10:59 2012] Extracting stamp from image fullrun_mos2_xmm0201160201_pi300-10000_cl_sm2.00.img.gz, (300, 114) - (457, 270)
[Thu Jul  5 13:10:59 2012] XMMSAS bgd. selection expression = annulus(32876.212000, 16660.164000, 2269.670065, 4539.340131, X, Y) && !ellipse(31998.147000, 15422.557000, 430.630412, 430.630412, 0.000000, X, Y) && !ellipse(35769.407800, 20005.164400, 504.868815, 504.868815, 0.000000, X, Y) && !ellipse(27905.703430, 17490.457596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35935.409424, 18934.711227, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 13:10:59 2012] Writing fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45.gif
[Thu Jul  5 13:13:25 2012] Mean detx,y = (-6976.32, -9957.74) 
[Thu Jul  5 13:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:14:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:14:02 2012] Setting source spectrum file to fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Jul  5 13:14:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Jul  5 14:06:26 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:06:26 2012] Error reading totcts from fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Jul  5 14:06:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:06:26 2012] Using photon index=1.80, rate=0.00531, arf fullrun_mos2_xmm0201160201_pi300-10000_pass1_cl_src45.arf
[Thu Jul  5 14:06:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:06:26 2012] Updating source flux to 8.3e-14