[Thu Jul  5 05:39:03 2012] Detection parameters:
  Position = (233.6, 342.5) = 2 19 42.87 57 10 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.8 +/- 8.3
  Background counts = 12.4
  Rate = 0.001 +/- 0.0003

[Thu Jul  5 05:39:03 2012] Off-axis axis estimate = 5.68'
[Thu Jul  5 07:05:58 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:05:58 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Thu Jul  5 07:05:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Thu Jul  5 07:05:58 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.27"
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33.csv
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33.csv
[Thu Jul  5 07:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul  5 07:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:26:17 2012] Spatial fit model total counts = 203.906000, observed total counts = 171.000000
[Thu Jul  5 08:26:17 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 08:26:17 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:26:17 2012] Assessing source extent using major
[Thu Jul  5 08:26:17 2012] Source does appear to be extended
[Thu Jul  5 08:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 08:26:17 2012] Source is confused with source 26
[Thu Jul  5 09:37:31 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 09:37:31 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Thu Jul  5 09:37:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Thu Jul  5 09:37:31 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.27"
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jul  5 10:17:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31.csv
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jul  5 10:17:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31.csv
[Thu Jul  5 10:17:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jul  5 10:17:01 2012] Fit fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jul  5 11:13:53 2012] Spatial fit model total counts = 181.082000, observed total counts = 171.000000
[Thu Jul  5 11:13:53 2012] Offset between fit and detection position for source 24 = 5.993612 pixels
[Thu Jul  5 11:13:53 2012] 196.905600 total counts/ 41.378600 bgd. counts: snr = 24.177862
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.993612 pixels
  Position = (230.4, 337.5) = 2 19 44.60 57 10 33.8
  Extent = 18.5 (12.1-37.1)", rotation angle = 0
  Source counts = 155.5 +/- 14.0
  Background counts = 41.4
  Rate = 0.004 +/- 0.0004
[Thu Jul  5 11:13:53 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 11:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 11:13:53 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 11:13:53 2012] Source does appear to be extended
[Thu Jul  5 11:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:43:37 2012] XMMSAS src. selection expression = ellipse(19995.702000, 29313.864000, 1112.340032, 1112.340032, 0.000000, X, Y)
[Thu Jul  5 12:43:37 2012] Writing source region out to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24_src.reg
[Thu Jul  5 12:43:37 2012] Extracting stamp from image fullrun_mos1_xmm0201160201_pi300-10000_cl_sm2.00.img.gz, (166, 274) - (294, 401)
[Thu Jul  5 12:43:37 2012] XMMSAS bgd. selection expression = annulus(19995.702000, 29313.864000, 1853.900053, 3707.800107, X, Y) && !ellipse(22502.620575, 28402.252319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.216000, 30896.454000, 488.931214, 488.931214, 0.000000, X, Y) && !ellipse(20054.470680, 29210.561200, 511.650415, 511.650415, 0.000000, X, Y) && !ellipse(16527.214294, 32583.044647, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 12:43:37 2012] Writing fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24.gif
[Thu Jul  5 12:51:35 2012] Mean detx,y = (1197.96, -7816.73) 
[Thu Jul  5 12:51:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 12:52:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 12:52:14 2012] Setting source spectrum file to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jul  5 12:52:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Jul  5 14:06:25 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:06:25 2012] Error reading totcts from fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jul  5 14:06:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:06:26 2012] Using photon index=1.80, rate=0.00398, arf fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src24.arf
[Thu Jul  5 14:06:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:06:26 2012] Updating source flux to 5.5e-14
[Thu Jul  5 14:06:29 2012] Flag p found in src. 24 procflags, skipping spectral fitting
[Thu Jul  5 14:06:29 2012] Flag c found in src. 24 procflags, skipping spectral fitting