[Thu Jul  5 05:39:03 2012] Detection parameters:
  Position = (311.0, 364.6) = 2 19 1.50 57 12 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.3 +/- 12.1
  Background counts = 13.4
  Rate = 0.003 +/- 0.0004

[Thu Jul  5 05:39:03 2012] Off-axis axis estimate = 4.89'
[Thu Jul  5 07:05:58 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:05:58 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Thu Jul  5 07:05:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.853
[Thu Jul  5 07:05:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.87"
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  5 07:43:22 2012] Fit fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_src11 appears to have run properly
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jul  5 07:43:22 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  5 07:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jul  5 07:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201160201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:26:17 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.210330 pixels away
[Thu Jul  5 08:26:17 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:26:17 2012] Assessing source extent using major
[Thu Jul  5 08:26:17 2012] Source does appear to be extended
[Thu Jul  5 08:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 09:37:31 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 09:37:31 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Thu Jul  5 09:37:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.853
[Thu Jul  5 09:37:31 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.87"
[Thu Jul  5 10:17:00 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jul  5 10:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 10:17:00 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jul  5 10:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 10:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jul  5 10:17:01 2012] fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jul  5 10:17:01 2012] Fit fullrun_mos1_xmm0201160201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jul  5 11:13:53 2012] Spatial fit model total counts = 215.819000, observed total counts = 209.000000
[Thu Jul  5 11:13:53 2012] Offset between fit and detection position for source 21 = 0.364645 pixels
[Thu Jul  5 11:13:53 2012] 222.011500 total counts/ 196.539000 bgd. counts: snr = 1.816968
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.364645 pixels
  Position = (310.8, 364.3) = 2 19 1.56 57 12 30.7
  Extent = 2.2" x 2.2", rotation angle = 0
  Source counts = 25.5 +/- 14.9
  Background counts = 196.5
  Rate = 0.0007 +/- 0.0004
[Thu Jul  5 11:13:53 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 11:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 11:13:53 2012] Assessing source extent using major
[Thu Jul  5 11:13:53 2012] Source does appear to be extended
[Thu Jul  5 11:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:43:37 2012] XMMSAS src. selection expression = ellipse(26993.636000, 31645.976200, 133.068004, 133.068004, 0.000000, X, Y)
[Thu Jul  5 12:43:37 2012] Writing source region out to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21_src.reg
[Thu Jul  5 12:43:37 2012] Extracting stamp from image fullrun_mos1_xmm0201160201_pi300-10000_cl_sm2.00.img.gz, (303, 357) - (318, 372)
[Thu Jul  5 12:43:37 2012] XMMSAS bgd. selection expression = annulus(26993.636000, 31645.976200, 221.780006, 443.560013, X, Y)
[Thu Jul  5 12:43:37 2012] Writing fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21.gif
[Thu Jul  5 12:46:07 2012] Mean detx,y = (4393.70, -1125.67) 
[Thu Jul  5 12:46:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 12:46:16 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 12:46:16 2012] Setting source spectrum file to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jul  5 12:46:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jul  5 13:04:21 2012] Not generating rmf since there are only 25 counts
[Thu Jul  5 13:04:21 2012] rmf not generated due to insufficient counts
[Thu Jul  5 14:06:25 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:06:25 2012] Error reading totcts from fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jul  5 14:06:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:06:25 2012] Using photon index=1.80, rate=0.000652, arf fullrun_mos1_xmm0201160201_pi300-10000_pass1_cl_src21.arf
[Thu Jul  5 14:06:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:06:25 2012] Updating source flux to 1.6e-14
[Thu Jul  5 14:06:29 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting