[Fri Aug 10 10:33:58 2012] Detection parameters:
  Position = (315.6, 505.3) = 1 46 22.68 61 26 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.5 +/- 9.9
  Background counts = 25.5
  Rate = 0.0009 +/- 0.0002

[Fri Aug 10 10:33:58 2012] Off-axis axis estimate = 15.05'
[Fri Aug 10 12:39:58 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:39:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 12:39:58 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Fri Aug 10 12:39:58 2012] source mask rpix=3.2, npix_max = 54, mask sum = 42, frac = 0.764
[Fri Aug 10 12:39:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.95"
[Fri Aug 10 13:14:44 2012] fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 10 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 10 13:14:44 2012] fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 10 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 10 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 13:14:44 2012] fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 10 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 10 13:14:44 2012] fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 10 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 10 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201160101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 13:15:01 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.551963 pixels away
[Fri Aug 10 13:15:01 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 13:15:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 13:15:01 2012] Assessing source extent using major
[Fri Aug 10 13:15:01 2012] Source does appear to be extended
[Fri Aug 10 13:15:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 13:15:01 2012] Deleting source due to low Poisson probability 0.9