[Sun Feb 12 10:39:48 2012] Detection parameters:
  Position = (316.7, 322.2) = 11 45 36.92 -18 27 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 787.2 +/- 43.7
  Background counts = 18.0
  Rate = 0.03 +/- 0.002

[Sun Feb 12 10:39:49 2012] Off-axis axis estimate = 2.18'
[Sun Feb 12 12:30:20 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:30:20 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Sun Feb 12 12:30:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Feb 12 12:30:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.52"
[Sun Feb 12 14:37:51 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Feb 12 14:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2.csv
[Sun Feb 12 14:37:51 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Feb 12 14:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2.csv
[Sun Feb 12 14:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:37:52 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Feb 12 14:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Feb 12 14:37:52 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Feb 12 14:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Feb 12 14:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:38:04 2012] Source 3 is offset by 7.652936 and 2.140036 pixels which is larger than
2 X fitted extent = 2.290676 x 2.290676, not incorporating fit results
[Sun Feb 12 14:38:04 2012] Source 3 is offset by -7.057271 and -2.566492 pixels which is larger than
2 X fitted extent = 0.849775 x 0.849775, not incorporating fit results
[Sun Feb 12 14:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:38:04 2012] Assessing source extent using major
[Sun Feb 12 14:38:04 2012] Source does appear to be extended
[Sun Feb 12 14:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:38:04 2012] Source is confused with source 5
[Sun Feb 12 17:02:17 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 17:02:17 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Sun Feb 12 17:02:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Feb 12 17:02:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.52"
[Sun Feb 12 18:56:33 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Feb 12 18:56:33 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Feb 12 18:56:33 2012] Fit fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Feb 12 18:56:34 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Feb 12 18:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Feb 12 18:56:34 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Feb 12 18:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Feb 12 18:56:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:56:40 2012] Source 3 is offset by 7.652936 and 2.556289 pixels which is larger than
2 X fitted extent = 2.572772 x 3.690510, not incorporating fit results
[Sun Feb 12 18:56:40 2012] Spatial fit model total counts = 3269.790000, observed total counts = 3267.000000
[Sun Feb 12 18:56:40 2012] Offset between fit and detection position for source 3 = 7.555412 pixels
[Sun Feb 12 18:56:40 2012] Warning, changing simple spatial fit ID from 2 to 5
[Sun Feb 12 18:56:40 2012] 3228.180000 total counts/ 1138.430000 bgd. counts: snr = 61.935717
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.555412 pixels
  Position = (309.6, 324.7) = 11 45 39.10 -18 27 0.2
  Extent = 29.2 (26.4-31.0)", rotation angle = 0
  Source counts = 2089.8 +/- 56.8
  Background counts = 1138.4
  Rate = 0.07 +/- 0.002
[Sun Feb 12 18:56:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 18:56:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 18:56:41 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 18:56:41 2012] Source does appear to be extended
[Sun Feb 12 18:56:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 23:52:34 2012] Counts = 2089.750000, rescaling region sizes by 2.000000
[Sun Feb 12 23:52:34 2012] XMMSAS src. selection expression = ellipse(26887.642000, 28203.044000, 3498.372101, 3498.372101, 0.000000, X, Y)
[Sun Feb 12 23:52:34 2012] Writing source region out to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3_src.reg
[Sun Feb 12 23:52:34 2012] Extracting stamp from image fullrun_mos2_xmm0201130201_pi300-10000_cl_sm2.00.img.gz, (109, 124) - (511, 526)
[Sun Feb 12 23:52:34 2012] XMMSAS bgd. selection expression = annulus(26887.642000, 28203.044000, 11661.240336, 23322.480671, X, Y) && !ellipse(26462.078200, 27901.459800, 1820.337652, 1820.337652, 0.000000, X, Y) && !ellipse(27562.235565, 27542.272400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28683.778351, 42652.086609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.056000, 29385.692000, 1241.456036, 1241.456036, 0.000000, X, Y) && !ellipse(23476.817200, 24238.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.225600, 19071.310000, 443.675213, 443.675213, 0.000000, X, Y) && !ellipse(28615.688115, 19587.204164, 523.715481, 314.454197, 355.589694, X, Y) && !ellipse(27621.322400, 26441.958000, 6996.744201, 6996.744201, 0.000000, X, Y) && !ellipse(22712.676600, 31764.262800, 366.318411, 366.318411, 0.000000, X, Y) && !ellipse(24956.940277, 27657.240479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.261810, 29551.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28452.386000, 26305.734000, 1223.880035, 1223.880035, 0.000000, X, Y) && !ellipse(31767.857727, 19604.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.069214, 43781.443146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.870800, 31659.838000, 1380.944040, 1380.944040, 0.000000, X, Y) && !ellipse(24054.952000, 28562.128200, 1264.960036, 1264.960036, 0.000000, X, Y) && !ellipse(29023.842000, 25833.224000, 1209.976035, 1209.976035, 0.000000, X, Y) && !ellipse(25175.807000, 32110.518000, 1450.056042, 1450.056042, 0.000000, X, Y) && !ellipse(27450.822000, 24704.782000, 1127.432032, 1127.432032, 0.000000, X, Y)
[Sun Feb 12 23:52:34 2012] Writing fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3.gif
[Sun Feb 12 23:57:01 2012] Mean detx,y = (94.47, 85.24) 
[Sun Feb 12 23:57:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 00:05:43 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 00:05:43 2012] Setting source spectrum file to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 00:05:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb 13 03:32:13 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:32:13 2012] Error reading totcts from fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 03:32:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:32:13 2012] Using photon index=1.80, rate=0.067, arf fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src3.arf
[Mon Feb 13 03:32:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:32:13 2012] Updating source flux to 6.7e-13
[Mon Feb 13 03:32:40 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Mon Feb 13 03:32:40 2012] Flag c found in src. 3 procflags, skipping spectral fitting