[Sun Feb 12 10:39:48 2012] Detection parameters:
  Position = (290.5, 370.8) = 11 45 44.94 -18 23 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.0 +/- 9.6
  Background counts = 14.1
  Rate = 0.002 +/- 0.0004

[Sun Feb 12 10:39:49 2012] Off-axis axis estimate = 5.28'
[Sun Feb 12 12:30:20 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:30:20 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sun Feb 12 12:30:20 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Sun Feb 12 12:30:20 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.07"
[Sun Feb 12 14:37:52 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41.ximg exists
[Sun Feb 12 14:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41.csv
[Sun Feb 12 14:37:52 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Feb 12 14:37:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41.csv
[Sun Feb 12 14:37:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:37:53 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Feb 12 14:37:53 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Feb 12 14:37:53 2012] Fit fullrun_mos2_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Feb 12 14:38:04 2012] Spatial fit model total counts = 217.575000, observed total counts = 215.000000
[Sun Feb 12 14:38:04 2012] Offset between fit and detection position for source 18 = 4.055522 pixels
[Sun Feb 12 14:38:04 2012] 191.484700 total counts/ 58.190700 bgd. counts: snr = 17.473657
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 4.055522 pixels
  Position = (288.3, 374.2) = 11 45 45.62 -18 23 25.0
  Extent = 15.6 (12.8-18.1)", rotation angle = 0
  Source counts = 133.3 +/- 13.8
  Background counts = 58.2
  Rate = 0.004 +/- 0.0004
[Sun Feb 12 14:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:38:04 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:38:04 2012] Source does appear to be extended
[Sun Feb 12 14:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:38:04 2012] Source is confused with source 22
[Sun Feb 12 17:02:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 17:02:17 2012] Initial guess for spatial extent in simple fitting = 15.63"
[Sun Feb 12 17:02:17 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.955
[Sun Feb 12 17:02:17 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 15.63"
[Sun Feb 12 18:56:33 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22.ximg exists
[Sun Feb 12 18:56:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22.csv
[Sun Feb 12 18:56:33 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Feb 12 18:56:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22.csv
[Sun Feb 12 18:56:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:56:34 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Feb 12 18:56:34 2012] fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Feb 12 18:56:34 2012] Fit fullrun_mos2_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Feb 12 18:56:41 2012] Spatial fit model total counts = 353.877000, observed total counts = 354.000000
[Sun Feb 12 18:56:41 2012] Offset between fit and detection position for source 18 = 4.848498 pixels
[Sun Feb 12 18:56:41 2012] 322.777000 total counts/ 170.166000 bgd. counts: snr = 11.699019
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 4.848498 pixels
  Position = (289.9, 369.6) = 11 45 45.12 -18 23 44.8
  Extent = 18.1 (13.6-31.3)", rotation angle = 0
  Source counts = 152.6 +/- 18.0
  Background counts = 170.2
  Rate = 0.005 +/- 0.0006
[Sun Feb 12 18:56:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 18:56:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 18:56:41 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 18:56:41 2012] Source does appear to be extended
[Sun Feb 12 18:56:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 23:52:34 2012] XMMSAS src. selection expression = ellipse(25175.807000, 32110.518000, 1087.542031, 1087.542031, 0.000000, X, Y)
[Sun Feb 12 23:52:34 2012] Writing source region out to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18_src.reg
[Sun Feb 12 23:52:34 2012] Extracting stamp from image fullrun_mos2_xmm0201130201_pi300-10000_cl_sm2.00.img.gz, (227, 307) - (352, 432)
[Sun Feb 12 23:52:34 2012] XMMSAS bgd. selection expression = annulus(25175.807000, 32110.518000, 1812.570052, 3625.140104, X, Y) && !ellipse(26462.078200, 27901.459800, 1820.337652, 1820.337652, 0.000000, X, Y) && !ellipse(26887.642000, 28203.044000, 2332.248067, 2332.248067, 0.000000, X, Y) && !ellipse(27743.056000, 29385.692000, 1241.456036, 1241.456036, 0.000000, X, Y) && !ellipse(27621.322400, 26441.958000, 6996.744201, 6996.744201, 0.000000, X, Y) && !ellipse(22712.676600, 31764.262800, 366.318411, 366.318411, 0.000000, X, Y) && !ellipse(24956.940277, 27657.240479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.261810, 29551.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.870800, 31659.838000, 1380.944040, 1380.944040, 0.000000, X, Y) && !ellipse(24054.952000, 28562.128200, 1264.960036, 1264.960036, 0.000000, X, Y)
[Sun Feb 12 23:52:34 2012] Writing fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18.gif
[Mon Feb 13 00:15:14 2012] Mean detx,y = (184.20, 4493.13) 
[Mon Feb 13 00:15:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 00:15:55 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 00:15:55 2012] Setting source spectrum file to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Feb 13 00:15:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Feb 13 03:32:13 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:32:13 2012] Error reading totcts from fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Feb 13 03:32:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:32:14 2012] Using photon index=1.80, rate=0.0049, arf fullrun_mos2_xmm0201130201_pi300-10000_pass1_cl_src18.arf
[Mon Feb 13 03:32:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:32:14 2012] Updating source flux to 6e-14
[Mon Feb 13 03:32:40 2012] Flag c found in src. 18 procflags, skipping spectral fitting