[Sun Feb 12 10:39:11 2012] Detection parameters:
  Position = (305.0, 321.1) = 11 45 40.52 -18 27 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214891.9 +/- 543.8
  Background counts = 16.5
  Rate = 7 +/- 0.02

[Sun Feb 12 10:39:12 2012] Off-axis axis estimate = 1.71'
[Sun Feb 12 11:45:35 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:45:35 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Feb 12 11:45:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Feb 12 11:45:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Feb 12 12:30:19 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 12:30:19 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 12:30:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:30:20 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 12:30:20 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 12:30:20 2012] Fit fullrun_mos1_xmm0201130201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 14:37:57 2012] Spatial fit model total counts = 186254.000000, observed total counts = 188908.000000
[Sun Feb 12 14:37:57 2012] Offset between fit and detection position for source 1 = 0.339580 pixels
[Sun Feb 12 14:37:57 2012] 186470.000000 total counts/ 25600.000000 bgd. counts: snr = 1005.437500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.339580 pixels
  Position = (304.7, 321.3) = 11 45 40.61 -18 27 15.3
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 160870.0 +/- 431.8
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Sun Feb 12 14:37:57 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:37:57 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:37:57 2012] Source does appear to be extended
[Sun Feb 12 14:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 16:57:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:57:38 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Feb 12 16:57:38 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Feb 12 16:57:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.62"
[Sun Feb 12 17:02:17 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 17:02:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 17:02:17 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 17:02:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 17:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:02:17 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 17:02:17 2012] fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 17:02:17 2012] Fit fullrun_mos1_xmm0201130201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 18:56:36 2012] Spatial fit model total counts = 180617.000000, observed total counts = 188130.000000
[Sun Feb 12 18:56:36 2012] Offset between fit and detection position for source 1 = 0.117744 pixels
[Sun Feb 12 18:56:36 2012] 180964.000000 total counts/ 25600.000000 bgd. counts: snr = 971.025000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.117744 pixels
  Position = (304.8, 321.2) = 11 45 40.58 -18 27 15.6
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 155364.0 +/- 425.4
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Sun Feb 12 18:56:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 18:56:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 18:56:36 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 18:56:36 2012] Source does appear to be extended
[Sun Feb 12 18:56:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 23:31:55 2012] Counts = 155364.000000, rescaling region sizes by 3.000000
[Sun Feb 12 23:31:55 2012] XMMSAS src. selection expression = ellipse(26467.498600, 27895.031600, 1074.610831, 1074.610831, 0.000000, X, Y)
[Sun Feb 12 23:31:55 2012] Writing source region out to fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 23:31:55 2012] Extracting stamp from image fullrun_mos1_xmm0201130201_pi300-10000_cl_sm2.00.img.gz, (243, 259) - (367, 383)
[Sun Feb 12 23:31:55 2012] XMMSAS bgd. selection expression = annulus(26467.498600, 27895.031600, 5373.054155, 10746.108309, X, Y) && !ellipse(27053.556600, 19056.406200, 552.389616, 384.444011, 359.946975, X, Y) && !ellipse(28603.904449, 19597.154312, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 23:31:55 2012] Writing fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 23:32:09 2012] Mean detx,y = (324.58, -260.22) 
[Sun Feb 12 23:32:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 23:35:17 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 23:35:17 2012] Setting source spectrum file to fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 23:35:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 03:32:13 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:32:13 2012] Error reading totcts from fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 03:32:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:32:13 2012] Using photon index=1.80, rate=4.99, arf fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 03:32:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:32:13 2012] Updating source flux to 4.5e-11
[Mon Feb 13 03:32:40 2012] Reading fit data from xmm0201130201/analysis//spectral/fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 03:32:40 2012] Spectral fit parameter nH value = 2.01989e+13
[Mon Feb 13 03:32:40 2012] Spectral fit parameter PhoIndex value = 2.10917
[Mon Feb 13 03:32:40 2012] Failed to get F(0.3-8.0) from xmm0201130201/analysis//spectral/fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 03:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:32:40 2012] Using Nh = 2e+13, photon index=2.11, rate=4.99, arf fullrun_mos1_xmm0201130201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 03:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:32:40 2012] Updating source flux to 3.9e-11