[Sun Jun 10 10:20:57 2012] Detection parameters:
  Position = (286.2, 195.2) = 4 5 9.59 -37 20 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 12.3
  Background counts = 26.9
  Rate = 0.005 +/- 0.0009

[Sun Jun 10 10:20:57 2012] Off-axis axis estimate = 7.54'
[Sun Jun 10 10:58:36 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:58:36 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Sun Jun 10 10:58:36 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Sun Jun 10 10:58:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.20"
[Sun Jun 10 11:29:40 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun 10 11:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7.csv
[Sun Jun 10 11:29:40 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun 10 11:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7.csv
[Sun Jun 10 11:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:29:40 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun 10 11:29:40 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun 10 11:29:40 2012] Fit fullrun_mos2_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jun 10 11:29:52 2012] Spatial fit model total counts = 118.000000, observed total counts = 118.000000
[Sun Jun 10 11:29:52 2012] Offset between fit and detection position for source 15 = 0.272698 pixels
[Sun Jun 10 11:29:52 2012] 118.874100 total counts/ 81.792800 bgd. counts: snr = 4.100128
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.272698 pixels
  Position = (286.5, 195.2) = 4 5 9.49 -37 20 19.7
  Extent = 4.5 (3.0-6.5)", rotation angle = 0
  Source counts = 37.1 +/- 10.9
  Background counts = 81.8
  Rate = 0.002 +/- 0.0005
[Sun Jun 10 11:29:52 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 11:29:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 11:29:52 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 11:29:52 2012] Source does appear to be extended
[Sun Jun 10 11:29:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 11:56:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:56:04 2012] Initial guess for spatial extent in simple fitting = 4.52"
[Sun Jun 10 11:56:04 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.951
[Sun Jun 10 11:56:04 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.52"
[Sun Jun 10 12:25:04 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun 10 12:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7.csv
[Sun Jun 10 12:25:04 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun 10 12:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7.csv
[Sun Jun 10 12:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 12:25:04 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun 10 12:25:04 2012] fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun 10 12:25:04 2012] Fit fullrun_mos2_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jun 10 12:25:13 2012] Spatial fit model total counts = 118.000000, observed total counts = 118.000000
[Sun Jun 10 12:25:13 2012] Offset between fit and detection position for source 15 = 0.000688 pixels
[Sun Jun 10 12:25:13 2012] 118.878000 total counts/ 81.924000 bgd. counts: snr = 4.082779
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.000688 pixels
  Position = (286.5, 195.2) = 4 5 9.49 -37 20 19.7
  Extent = 4.5 (3.0-6.5)", rotation angle = 0
  Source counts = 37.0 +/- 10.9
  Background counts = 81.9
  Rate = 0.002 +/- 0.0005
[Sun Jun 10 12:25:13 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 12:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 12:25:13 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 12:25:13 2012] Source does appear to be extended
[Sun Jun 10 12:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 12:45:02 2012] XMMSAS src. selection expression = ellipse(24874.593000, 16934.692800, 269.344808, 269.344808, 0.000000, X, Y)
[Sun Jun 10 12:45:02 2012] Writing source region out to fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15_src.reg
[Sun Jun 10 12:45:02 2012] Extracting stamp from image fullrun_mos2_xmm0201130101_pi300-10000_cl_sm2.00.img.gz, (271, 180) - (302, 211)
[Sun Jun 10 12:45:02 2012] XMMSAS bgd. selection expression = annulus(24874.593000, 16934.692800, 448.908013, 897.816026, X, Y)
[Sun Jun 10 12:45:02 2012] Writing fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15.gif
[Sun Jun 10 12:48:02 2012] Mean detx,y = (3692.50, -10323.04) 
[Sun Jun 10 12:48:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 12:48:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 12:48:18 2012] Setting source spectrum file to fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jun 10 12:48:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jun 10 12:56:32 2012] Not generating rmf since there are only 36 counts
[Sun Jun 10 12:56:32 2012] rmf not generated due to insufficient counts
[Sun Jun 10 12:58:13 2012] Updating aperture counts using extracted products
[Sun Jun 10 12:58:13 2012] Error reading totcts from fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jun 10 12:58:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 12:58:14 2012] Using photon index=1.80, rate=0.00176, arf fullrun_mos2_xmm0201130101_pi300-10000_pass1_cl_src15.arf
[Sun Jun 10 12:58:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 12:58:14 2012] Updating source flux to 4.5e-14
[Sun Jun 10 12:58:40 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting