[Sun Jun 10 10:20:28 2012] Detection parameters:
  Position = (300.1, 508.2) = 4 5 4.54 -36 57 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.2 +/- 13.5
  Background counts = 19.2
  Rate = 0.004 +/- 0.0006

[Sun Jun 10 10:20:28 2012] Off-axis axis estimate = 15.21'
[Sun Jun 10 10:34:49 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:34:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 10:34:49 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Jun 10 10:34:49 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.153
[Sun Jun 10 10:34:49 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 14.03"
[Sun Jun 10 10:58:36 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 10 10:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 10 10:58:36 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 10 10:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 10 10:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 10:58:36 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 10 10:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 10 10:58:36 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 10 10:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 10 10:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:29:47 2012] Spatial fit model total counts = 161.667000, observed total counts = 140.000000
[Sun Jun 10 11:29:47 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 10 11:29:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 11:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 11:29:47 2012] Assessing source extent using major
[Sun Jun 10 11:29:47 2012] Source does appear to be extended
[Sun Jun 10 11:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 11:31:37 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:31:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 11:31:37 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Jun 10 11:31:37 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.153
[Sun Jun 10 11:31:37 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 14.03"
[Sun Jun 10 11:56:04 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun 10 11:56:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8.csv
[Sun Jun 10 11:56:04 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun 10 11:56:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8.csv
[Sun Jun 10 11:56:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:56:04 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun 10 11:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 10 11:56:04 2012] fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun 10 11:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 10 11:56:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201130101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 12:25:08 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.667826 pixels away
[Sun Jun 10 12:25:08 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 12:25:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 12:25:08 2012] Assessing source extent using major
[Sun Jun 10 12:25:08 2012] Source does appear to be extended
[Sun Jun 10 12:25:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 12:32:17 2012] XMMSAS src. selection expression = ellipse(26056.491455, 44164.308990, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 12:32:17 2012] Writing source region out to fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 10 12:32:17 2012] Extracting stamp from image fullrun_mos1_xmm0201130101_pi300-10000_cl_sm2.00.img.gz, (263, 471) - (338, 546)
[Sun Jun 10 12:32:17 2012] XMMSAS bgd. selection expression = annulus(26056.491455, 44164.308990, 1087.500000, 2175.000000, X, Y)
[Sun Jun 10 12:32:17 2012] Writing fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5.gif
[Sun Jun 10 12:35:50 2012] Mean detx,y = (16579.40, 1794.08) 
[Sun Jun 10 12:35:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 12:36:20 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 12:36:20 2012] Setting source spectrum file to fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 12:36:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 10 12:44:09 2012] Not generating rmf since there are only 99 counts
[Sun Jun 10 12:44:09 2012] rmf not generated due to insufficient counts
[Sun Jun 10 12:58:12 2012] Updating aperture counts using extracted products
[Sun Jun 10 12:58:12 2012] Error reading totcts from fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 12:58:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 12:58:13 2012] Using photon index=1.80, rate=0.00411, arf fullrun_mos1_xmm0201130101_pi300-10000_pass1_cl_src5.arf
[Sun Jun 10 12:58:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 12:58:13 2012] Updating source flux to 1.1e-13
[Sun Jun 10 12:58:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting