[Sat Jun 30 10:04:30 2012] Detection parameters:
  Position = (318.1, 311.8) = 2 6 15.95 -0 17 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8474.4 +/- 109.2
  Background counts = 20.4
  Rate = 2 +/- 0.02

[Sat Jun 30 10:04:30 2012] Off-axis axis estimate = 1.72'
[Sat Jun 30 10:06:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 10:06:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 30 10:06:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 30 10:06:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 30 10:12:20 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 30 10:12:20 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 30 10:12:20 2012] Fit fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 30 10:12:20 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 30 10:12:20 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 30 10:12:20 2012] Fit fullrun_mos2_xmm0201090201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 30 10:12:21 2012] Spatial fit model total counts = 4237.230000, observed total counts = 4271.000000
[Sat Jun 30 10:12:21 2012] Offset between fit and detection position for source 1 = 0.303780 pixels
[Sat Jun 30 10:12:21 2012] 4248.693000 total counts/ 801.933000 bgd. counts: snr = 121.714411
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.303780 pixels
  Position = (317.8, 311.6) = 2 6 16.03 -0 17 29.9
  Extent = 7.3 (7.3-7.3)" x 5.9 (5.9-5.9)", rotation angle = 32 (32-32) degrees
  Source counts = 3446.8 +/- 65.2
  Background counts = 801.9
  Rate = 1 +/- 0.02
[Sat Jun 30 10:12:21 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 10:12:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 10:12:21 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 10:12:21 2012] Source does appear to be extended
[Sat Jun 30 10:12:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Sat Jun 30 10:14:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 30 10:14:03 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Sat Jun 30 10:14:03 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Sat Jun 30 10:14:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.56"
[Sat Jun 30 10:15:44 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 30 10:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 30 10:15:44 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 30 10:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 30 10:15:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 10:15:44 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 30 10:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 30 10:15:44 2012] fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 30 10:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 30 10:15:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201090201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 10:15:46 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sat Jun 30 10:15:46 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 10:15:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 10:15:46 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 10:15:46 2012] Source does appear to be extended
[Sat Jun 30 10:15:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Sat Jun 30 10:55:44 2012] Counts = 3446.760000, rescaling region sizes by 2.000000
[Sat Jun 30 10:55:44 2012] XMMSAS src. selection expression = ellipse(27598.978940, 27064.847800, 871.028425, 702.445220, 31.971298, X, Y)
[Sat Jun 30 10:55:44 2012] Writing source region out to fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 30 10:55:44 2012] Extracting stamp from image fullrun_mos2_xmm0201090201_pi300-10000_cl_sm2.00.img.gz, (268, 262) - (368, 362)
[Sat Jun 30 10:55:44 2012] XMMSAS bgd. selection expression = annulus(27598.978940, 27064.847800, 2903.428084, 5806.856167, X, Y) && !ellipse(23852.546326, 32023.252960, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 30 10:55:44 2012] Writing fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 30 10:55:45 2012] Mean detx,y = (26.75, 47.79) 
[Sat Jun 30 10:55:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 10:55:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 10:55:57 2012] Setting source spectrum file to fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 30 10:55:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 30 10:59:34 2012] Updating aperture counts using extracted products
[Sat Jun 30 10:59:34 2012] Error reading totcts from fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 30 10:59:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 10:59:34 2012] Using photon index=1.80, rate=1.27, arf fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 30 10:59:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 10:59:34 2012] Updating source flux to 1.3e-11
[Sat Jun 30 10:59:50 2012] Reading fit data from xmm0201090201/analysis//spectral/fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 30 10:59:50 2012] Spectral fit parameter nH value = 3.27642e+15
[Sat Jun 30 10:59:50 2012] Spectral fit parameter PhoIndex value = 1.94719
[Sat Jun 30 10:59:50 2012] Failed to get F(0.3-8.0) from xmm0201090201/analysis//spectral/fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 30 10:59:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 10:59:50 2012] Using Nh = 3.3e+15, photon index=1.95, rate=1.27, arf fullrun_mos2_xmm0201090201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 30 10:59:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 10:59:50 2012] Updating source flux to 1.3e-11