[Fri Mar  9 10:30:04 2012] Detection parameters:
  Position = (259.2, 339.1) = 16 32 2.48 -48 44 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 12.9
  Background counts = 45.3
  Rate = 0.003 +/- 0.0006

[Fri Mar  9 10:30:04 2012] Off-axis axis estimate = 4.10'
[Fri Mar  9 11:12:06 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 11:12:06 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Fri Mar  9 11:12:06 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Fri Mar  9 11:12:06 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.48"
[Fri Mar  9 11:37:05 2012] fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Mar  9 11:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13.csv
[Fri Mar  9 11:37:05 2012] fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Mar  9 11:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13.csv
[Fri Mar  9 11:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 11:37:05 2012] fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Mar  9 11:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Mar  9 11:37:05 2012] fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Mar  9 11:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Mar  9 11:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201000301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 11:37:16 2012] Spatial fit model total counts = 441.521000, observed total counts = 463.000000
[Fri Mar  9 11:37:16 2012] Offset between fit and detection position for source 7 = 0.734092 pixels
[Fri Mar  9 11:37:16 2012] Warning, changing simple spatial fit ID from 13 to 5
[Fri Mar  9 11:37:16 2012] 445.268700 total counts/ 423.070000 bgd. counts: snr = 1.079248
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.734092 pixels
  Position = (259.5, 339.8) = 16 32 2.35 -48 44 21.2
  Extent = 3.8 (2.0-6.5)", rotation angle = 0
  Source counts = 22.2 +/- 21.1
  Background counts = 423.1
  Rate = 0.001 +/- 0.0009
  Deleting source due to low Poisson probability