[Tue Apr 10 16:05:47 2012] Detection parameters:
  Position = (240.1, 300.1) = 9 58 47.63 69 5 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2567.8 +/- 62.7
  Background counts = 109.3
  Rate = 0.03 +/- 0.0007

[Tue Apr 10 16:05:51 2012] Off-axis axis estimate = 4.23'
[Tue Apr 10 16:06:29 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:29 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Tue Apr 10 16:06:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Tue Apr 10 16:06:29 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.54"
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4.csv
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4.csv
[Tue Apr 10 16:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Apr 10 16:06:31 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Apr 10 16:07:00 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.707712 pixels away
[Tue Apr 10 16:07:00 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:00 2012] Assessing source extent using major
[Tue Apr 10 16:07:00 2012] Source does appear to be extended
[Tue Apr 10 16:07:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:07:21 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:21 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Tue Apr 10 16:07:21 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Tue Apr 10 16:07:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.54"
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4.csv
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4.csv
[Tue Apr 10 16:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Apr 10 16:07:22 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Apr 10 16:07:48 2012] Spatial fit model total counts = 2690.770000, observed total counts = 2698.000000
[Tue Apr 10 16:07:48 2012] Offset between fit and detection position for source 6 = 0.050262 pixels
[Tue Apr 10 16:07:48 2012] 2696.860000 total counts/ 1092.660000 bgd. counts: snr = 48.530637
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.050262 pixels
  Position = (240.1, 300.1) = 9 58 47.65 69 5 33.4
  Extent = 4.9" x 4.9", rotation angle = 0
  Source counts = 1604.2 +/- 51.9
  Background counts = 1092.7
  Rate = 0.02 +/- 0.0005
[Tue Apr 10 16:07:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:48 2012] Assessing source extent using major
[Tue Apr 10 16:07:48 2012] Source does appear to be extended
[Tue Apr 10 16:07:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:08:41 2012] Counts = 1604.200000, rescaling region sizes by 2.000000
[Tue Apr 10 16:08:41 2012] XMMSAS src. selection expression = ellipse(20840.719780, 26060.048600, 583.159217, 583.159217, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Not overwriting source region fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src.reg
[Tue Apr 10 16:08:41 2012] Extracting stamp from image fullrun_mos2_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (207, 267) - (274, 334)
[Tue Apr 10 16:08:41 2012] XMMSAS bgd. selection expression = annulus(20840.719780, 26060.048600, 1943.864056, 3887.728112, X, Y) && !ellipse(24705.609894, 25338.499847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16549.700500, 23785.923600, 499.739214, 499.739214, 0.000000, X, Y) && !ellipse(18028.938968, 24342.236808, 456.001613, 456.001613, 0.000000, X, Y) && !ellipse(21525.927800, 29133.808200, 1387.312040, 322.270409, 132.208284, X, Y) && !ellipse(25303.695068, 23988.154602, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Writing fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6.gif
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:43 2012] Mean detx,y = (-1673.27, -5814.85) 
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:43 2012] Setting source spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Apr 10 16:08:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6.rmf exists, delete to re-create
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Tue Apr 10 16:10:44 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:44 2012] Error reading totcts from fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Apr 10 16:10:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:45 2012] Using photon index=1.80, rate=0.0155, arf fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src6.arf
[Tue Apr 10 16:10:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:45 2012] Updating source flux to 1.9e-13