[Tue Apr 10 16:05:48 2012] Detection parameters:
  Position = (491.8, 288.1) = 9 55 23.24 69 4 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.4 +/- 26.7
  Background counts = 39.4
  Rate = 0.002 +/- 0.0002

[Tue Apr 10 16:05:51 2012] Off-axis axis estimate = 14.04'
[Tue Apr 10 16:06:29 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:29 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue Apr 10 16:06:29 2012] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.795
[Tue Apr 10 16:06:29 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 13.45"
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47.csv
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47.csv
[Tue Apr 10 16:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Apr 10 16:06:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Apr 10 16:06:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Tue Apr 10 16:06:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:00 2012] Warning, spatial fit 47 centroid is now closest to src. 23
[Tue Apr 10 16:07:00 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:00 2012] Assessing source extent using major
[Tue Apr 10 16:07:00 2012] Source does appear to be extended
[Tue Apr 10 16:07:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:07:21 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:21 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue Apr 10 16:07:21 2012] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.795
[Tue Apr 10 16:07:21 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 13.45"
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47.csv
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47_1.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47.csv
[Tue Apr 10 16:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:23 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Tue Apr 10 16:07:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Tue Apr 10 16:07:23 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Tue Apr 10 16:07:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Tue Apr 10 16:07:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:48 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.696160 pixels away
[Tue Apr 10 16:07:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:48 2012] Assessing source extent using major
[Tue Apr 10 16:07:48 2012] Source does appear to be extended
[Tue Apr 10 16:07:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:08:42 2012] XMMSAS src. selection expression = ellipse(42734.966003, 25016.466034, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 16:08:42 2012] Not overwriting source region fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src.reg
[Tue Apr 10 16:08:42 2012] Extracting stamp from image fullrun_mos2_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (454, 251) - (529, 326)
[Tue Apr 10 16:08:42 2012] XMMSAS bgd. selection expression = annulus(42734.966003, 25016.466034, 1087.500000, 2175.000000, X, Y) && !ellipse(41719.478000, 24195.543400, 1360.048839, 1360.048839, 0.000000, X, Y) && !ellipse(39955.601685, 26056.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42948.589661, 25801.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39880.906000, 29423.822000, 3961.184114, 3961.184114, 0.000000, X, Y) && !ellipse(41851.465179, 26739.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40885.994253, 23303.851216, 1504.467510, 1504.467510, 0.000000, X, Y) && !ellipse(41837.594402, 27075.269829, 1385.928040, 192.010897, 92.704940, X, Y) && !ellipse(41416.032410, 27269.680542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40896.302460, 26993.169861, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:42 2012] Writing fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26.gif
[Tue Apr 10 16:08:44 2012] ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:44 2012] Mean detx,y = (10245.04, 12311.66) 
[Tue Apr 10 16:08:44 2012] ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:44 2012] ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:44 2012] Setting source spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Apr 10 16:08:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Apr 10 16:08:44 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 16:08:51 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Tue Apr 10 16:10:45 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:45 2012] Error reading totcts from fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Apr 10 16:10:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:46 2012] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src26.arf
[Tue Apr 10 16:10:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:46 2012] Updating source flux to 6.2e-14
[Tue Apr 10 16:10:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting