[Tue Apr 10 16:05:47 2012] Detection parameters:
  Position = (491.2, 241.1) = 9 55 24.09 69 1 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1153.7 +/- 42.8
  Background counts = 49.8
  Rate = 0.01 +/- 0.0004

[Tue Apr 10 16:05:51 2012] Off-axis axis estimate = 14.58'
[Tue Apr 10 16:06:29 2012] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:06:29 2012] Initial guess for spatial extent in simple fitting = 13.72"
[Tue Apr 10 16:06:29 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.049
[Tue Apr 10 16:06:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.72"
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 16:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Apr 10 16:06:31 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Apr 10 16:07:00 2012] Source 2 is offset by -1.887727 and -3.980866 pixels which is larger than
2 X fitted extent = 1.576943 x 1.576943, not incorporating fit results
[Tue Apr 10 16:07:00 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Tue Apr 10 16:07:00 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:00 2012] Assessing source extent using major
[Tue Apr 10 16:07:00 2012] Source does appear to be extended
[Tue Apr 10 16:07:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:07:21 2012] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:07:21 2012] Initial guess for spatial extent in simple fitting = 13.72"
[Tue Apr 10 16:07:21 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.049
[Tue Apr 10 16:07:21 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.72"
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 16:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Apr 10 16:07:22 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Apr 10 16:07:48 2012] Source 2 is offset by 5.372273 and 0.279134 pixels which is larger than
2 X fitted extent = 0.981940 x 0.981940, not incorporating fit results
[Tue Apr 10 16:07:48 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Tue Apr 10 16:07:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:48 2012] Assessing source extent using major
[Tue Apr 10 16:07:48 2012] Source does appear to be extended
[Tue Apr 10 16:07:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:08:41 2012] Counts = 1153.667969, rescaling region sizes by 2.000000
[Tue Apr 10 16:08:41 2012] XMMSAS src. selection expression = ellipse(42688.319794, 20930.216644, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Not overwriting source region fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 16:08:41 2012] Extracting stamp from image fullrun_mos2_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (416, 166) - (566, 316)
[Tue Apr 10 16:08:41 2012] XMMSAS bgd. selection expression = annulus(42688.319794, 20930.216644, 4350.000000, 8700.000000, X, Y) && !ellipse(41719.478000, 24195.543400, 1360.048839, 1360.048839, 0.000000, X, Y) && !ellipse(41527.448000, 20148.384000, 637.128018, 637.128018, 0.000000, X, Y) && !ellipse(39955.601685, 26056.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34959.946350, 19974.899933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39682.781494, 23115.579224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42948.589661, 25801.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38561.589172, 21716.470383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39637.064545, 18761.579422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39880.906000, 29423.822000, 3961.184114, 3961.184114, 0.000000, X, Y) && !ellipse(41851.465179, 26739.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37903.099532, 20749.203773, 371.323837, 371.323837, 0.000000, X, Y) && !ellipse(40032.802000, 17810.634000, 522.218415, 522.218415, 0.000000, X, Y) && !ellipse(40885.994253, 23303.851216, 1504.467510, 1504.467510, 0.000000, X, Y) && !ellipse(38998.317200, 25929.211200, 404.548012, 404.548012, 0.000000, X, Y) && !ellipse(33339.879333, 14675.942017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42734.966003, 25016.466034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41837.594402, 27075.269829, 1385.928040, 192.010897, 92.704940, X, Y) && !ellipse(40680.443268, 18396.712021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39404.308746, 20486.881180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41416.032410, 27269.680542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38607.714996, 18915.358719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40674.931427, 21441.937698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37362.277924, 27179.985687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37469.177368, 16413.192734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40896.302460, 26993.169861, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Writing fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:43 2012] Mean detx,y = (6231.20, 14556.22) 
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:43 2012] Setting source spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:08:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 16:08:43 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 16:08:51 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 16:10:44 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:44 2012] Error reading totcts from fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:10:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:45 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 16:10:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:45 2012] Updating source flux to 3.2e-13
[Tue Apr 10 16:10:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting