[Tue Apr 10 16:05:47 2012] Detection parameters:
  Position = (480.6, 278.9) = 9 55 32.43 69 3 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116628.3 +/- 419.3
  Background counts = 49.1
  Rate = 1 +/- 0.004

[Tue Apr 10 16:05:51 2012] Off-axis axis estimate = 13.28'
[Tue Apr 10 16:06:29 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:06:29 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Tue Apr 10 16:06:29 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.855
[Tue Apr 10 16:06:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.07"
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:06:30 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 16:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 16:06:31 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:06:31 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:07:00 2012] Spatial fit model total counts = 102452.000000, observed total counts = 102392.000000
[Tue Apr 10 16:07:00 2012] Offset between fit and detection position for source 1 = 0.558343 pixels
[Tue Apr 10 16:07:00 2012] 102358.000000 total counts/ 25766.900000 bgd. counts: snr = 477.141532
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.558343 pixels
  Position = (480.1, 278.6) = 9 55 32.82 69 3 56.6
  Extent = 6.7 (6.7-6.8)", rotation angle = 0
  Source counts = 76591.1 +/- 319.9
  Background counts = 25766.9
  Rate = 0.7 +/- 0.003
[Tue Apr 10 16:07:00 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:00 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:07:00 2012] Source does appear to be extended
[Tue Apr 10 16:07:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:07:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:21 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Tue Apr 10 16:07:21 2012] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.896
[Tue Apr 10 16:07:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.72"
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 16:07:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 16:07:22 2012] fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:07:22 2012] Fit fullrun_mos2_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:07:48 2012] Spatial fit model total counts = 93833.800000, observed total counts = 94364.000000
[Tue Apr 10 16:07:48 2012] Offset between fit and detection position for source 1 = 0.021174 pixels
[Tue Apr 10 16:07:48 2012] 93949.600000 total counts/ 25600.000000 bgd. counts: snr = 427.185000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021174 pixels
  Position = (480.1, 278.7) = 9 55 32.81 69 3 56.6
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 68349.6 +/- 306.5
  Background counts = 25600.0
  Rate = 0.7 +/- 0.003
[Tue Apr 10 16:07:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:48 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:07:48 2012] Source does appear to be extended
[Tue Apr 10 16:07:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:08:41 2012] Counts = 68349.600000, rescaling region sizes by 3.000000
[Tue Apr 10 16:08:41 2012] XMMSAS src. selection expression = ellipse(41719.478000, 24195.543400, 1020.036629, 1020.036629, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Not overwriting source region fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 16:08:41 2012] Extracting stamp from image fullrun_mos2_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (421, 220) - (539, 337)
[Tue Apr 10 16:08:41 2012] XMMSAS bgd. selection expression = annulus(41719.478000, 24195.543400, 5100.183147, 10200.366294, X, Y) && !ellipse(41527.448000, 20148.384000, 637.128018, 637.128018, 0.000000, X, Y) && !ellipse(42688.319794, 20930.216644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39955.601685, 26056.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34959.946350, 19974.899933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32252.867859, 15646.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39682.781494, 23115.579224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42948.589661, 25801.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38561.589172, 21716.470383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39637.064545, 18761.579422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39880.906000, 29423.822000, 3961.184114, 3961.184114, 0.000000, X, Y) && !ellipse(41851.465179, 26739.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35847.820007, 31691.817688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32649.701813, 20364.189621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37903.099532, 20749.203773, 371.323837, 371.323837, 0.000000, X, Y) && !ellipse(32328.469818, 24697.729767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40032.802000, 17810.634000, 522.218415, 522.218415, 0.000000, X, Y) && !ellipse(40885.994253, 23303.851216, 1504.467510, 1504.467510, 0.000000, X, Y) && !ellipse(38998.317200, 25929.211200, 404.548012, 404.548012, 0.000000, X, Y) && !ellipse(33339.879333, 14675.942017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42734.966003, 25016.466034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41837.594402, 27075.269829, 1385.928040, 192.010897, 92.704940, X, Y) && !ellipse(40680.443268, 18396.712021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39404.308746, 20486.881180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37809.756561, 34732.702393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41416.032410, 27269.680542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38607.714996, 18915.358719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33183.930878, 32221.857117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40674.931427, 21441.937698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37362.277924, 27179.985687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37469.177368, 16413.192734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33298.375916, 33977.728882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40896.302460, 26993.169861, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:41 2012] Writing fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 16:08:42 2012] ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0200980101/products/events/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:42 2012] Mean detx,y = (9074.63, 12168.51) 
[Tue Apr 10 16:08:42 2012] ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0200980101/products/images/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:42 2012] ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:42 2012] Setting source spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 16:08:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 16:08:42 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 16:08:51 2012] fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 16:10:44 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:44 2012] Error reading totcts from fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 16:10:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:45 2012] Using photon index=1.80, rate=0.659, arf fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 16:10:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:45 2012] Updating source flux to 2.1e-11
[Tue Apr 10 16:10:52 2012] Reading fit data from xmm0200980101/analysis//spectral/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 16:10:52 2012] Spectral fit parameter nH value = 7.73149e+20
[Tue Apr 10 16:10:52 2012] Spectral fit parameter PhoIndex value = 1.92975
[Tue Apr 10 16:10:52 2012] Failed to get F(0.3-8.0) from xmm0200980101/analysis//spectral/fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 16:10:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:52 2012] Using Nh = 7.7e+20, photon index=1.93, rate=0.659, arf fullrun_mos2_xmm0200980101_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 16:10:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:52 2012] Updating source flux to 2.1e-11