[Tue Apr 10 16:05:46 2012] Detection parameters:
  Position = (306.1, 257.2) = 9 57 54.02 69 2 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.2 +/- 19.7
  Background counts = 134.1
  Rate = 0.0007 +/- 0.0002

[Tue Apr 10 16:05:47 2012] Off-axis axis estimate = 3.04'
[Tue Apr 10 16:06:27 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:27 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Apr 10 16:06:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Tue Apr 10 16:06:27 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 7.95"
[Tue Apr 10 16:06:28 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78.ximg exists
[Tue Apr 10 16:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78.csv
[Tue Apr 10 16:06:28 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78_1.ximg exists
[Tue Apr 10 16:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78.csv
[Tue Apr 10 16:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:06:29 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Tue Apr 10 16:06:29 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Tue Apr 10 16:06:29 2012] Fit fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Tue Apr 10 16:06:51 2012] Source 61 is offset by -0.807630 and -9.472017 pixels which is larger than
2 X fitted extent = 1.284069 x 1.284069, not incorporating fit results
[Tue Apr 10 16:06:51 2012] Warning, spatial fit 78 centroid is now closest to src. 59
[Tue Apr 10 16:06:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:06:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:06:51 2012] Assessing source extent using major
[Tue Apr 10 16:06:51 2012] Source does appear to be extended
[Tue Apr 10 16:06:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:06:51 2012] Source is confused with source 59
[Tue Apr 10 16:07:19 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:19 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Apr 10 16:07:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Tue Apr 10 16:07:19 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 7.95"
[Tue Apr 10 16:07:20 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63.ximg exists
[Tue Apr 10 16:07:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63.csv
[Tue Apr 10 16:07:20 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63_1.ximg exists
[Tue Apr 10 16:07:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63.csv
[Tue Apr 10 16:07:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:21 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Tue Apr 10 16:07:21 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Apr 10 16:07:21 2012] Fit fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Tue Apr 10 16:07:39 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.216695 pixels away
[Tue Apr 10 16:07:39 2012] Warning, spatial fit 63 centroid is now closest to src. 59
[Tue Apr 10 16:07:39 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:39 2012] Assessing source extent using major
[Tue Apr 10 16:07:39 2012] Source does appear to be extended
[Tue Apr 10 16:07:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:08:33 2012] XMMSAS src. selection expression = ellipse(26583.488220, 22331.530487, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 16:08:33 2012] Not overwriting source region fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src.reg
[Tue Apr 10 16:08:33 2012] Extracting stamp from image fullrun_mos1_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (269, 220) - (344, 295)
[Tue Apr 10 16:08:33 2012] XMMSAS bgd. selection expression = annulus(26583.488220, 22331.530487, 1087.500000, 2175.000000, X, Y) && !ellipse(26677.246620, 23953.243600, 1331.013638, 1331.013638, 0.000000, X, Y) && !ellipse(28524.465973, 19493.043976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.529694, 23117.796173, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26926.654304, 23033.308000, 1271.616037, 1271.616037, 0.000000, X, Y) && !ellipse(28507.422000, 22697.274000, 1257.840036, 1257.840036, 0.000000, X, Y)
[Tue Apr 10 16:08:33 2012] Writing fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61.gif
[Tue Apr 10 16:08:36 2012] ../../xmm0200980101/products/events/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0200980101/products/events/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:36 2012] Mean detx,y = (1176.79, 1085.03) 
[Tue Apr 10 16:08:36 2012] ../../xmm0200980101/products/images/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src.img and ../../xmm0200980101/products/images/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:36 2012] ../../xmm0200980101/products/spectra/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:36 2012] Setting source spectrum file to fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Apr 10 16:08:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Tue Apr 10 16:08:36 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:41 2012] Not generating rmf since there are only 80 counts
[Tue Apr 10 16:08:41 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:08:41 2012] fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Tue Apr 10 16:10:43 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:43 2012] Error reading totcts from fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Apr 10 16:10:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:44 2012] Using photon index=1.80, rate=0.000727, arf fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src61.arf
[Tue Apr 10 16:10:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:44 2012] Updating source flux to 7e-15
[Tue Apr 10 16:10:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting