[Tue Apr 10 16:05:44 2012] Detection parameters:
  Position = (480.8, 232.1) = 9 55 32.60 69 0 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13731.7 +/- 141.3
  Background counts = 72.2
  Rate = 0.1 +/- 0.001

[Tue Apr 10 16:05:47 2012] Off-axis axis estimate = 14.07'
[Tue Apr 10 16:06:27 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:06:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:06:27 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Tue Apr 10 16:06:27 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.083
[Tue Apr 10 16:06:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.46"
[Tue Apr 10 16:06:27 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Apr 10 16:06:27 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Apr 10 16:06:27 2012] Fit fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Apr 10 16:06:28 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Apr 10 16:06:28 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Apr 10 16:06:28 2012] Fit fullrun_mos1_xmm0200980101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Apr 10 16:06:50 2012] Warning, spatial fit 3 centroid is now closest to src. 69
[Tue Apr 10 16:06:51 2012] Source 2 is offset by 2.618258 and 3.283018 pixels which is larger than
2 X fitted extent = 0.913517 x 0.913517, not incorporating fit results
[Tue Apr 10 16:06:51 2012] Spatial fit model total counts = 5156.960000, observed total counts = 5307.000000
[Tue Apr 10 16:06:51 2012] Offset between fit and detection position for source 2 = 3.021658 pixels
[Tue Apr 10 16:06:51 2012] Warning, changing simple spatial fit ID from 3 to 82
[Tue Apr 10 16:06:51 2012] 4986.205000 total counts/ 907.595000 bgd. counts: snr = 135.383623
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.021658 pixels
  Position = (477.9, 232.7) = 9 55 34.99 69 0 36.9
  Extent = 8.1 (7.9-8.3)" x 7.4 (7.3-7.5)", rotation angle = 90 (86-90) degrees
  Source counts = 4078.6 +/- 70.6
  Background counts = 907.6
  Rate = 0.04 +/- 0.0007
[Tue Apr 10 16:06:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:06:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:06:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:06:51 2012] Source does appear to be extended
[Tue Apr 10 16:06:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Tue Apr 10 16:07:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:07:19 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Apr 10 16:07:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Tue Apr 10 16:07:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.74"
[Tue Apr 10 16:07:20 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Apr 10 16:07:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 16:07:20 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Apr 10 16:07:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 16:07:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:21 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Apr 10 16:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Apr 10 16:07:21 2012] fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Apr 10 16:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Apr 10 16:07:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200980101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:07:39 2012] Warning, spatial fit 3 centroid is now closest to src. 71
[Tue Apr 10 16:07:39 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:07:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:07:39 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:07:39 2012] Source does appear to be extended
[Tue Apr 10 16:07:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Tue Apr 10 16:08:32 2012] Counts = 4078.610000, rescaling region sizes by 2.000000
[Tue Apr 10 16:08:32 2012] XMMSAS src. selection expression = ellipse(41524.766000, 20197.734000, 971.292028, 886.411226, 90.000000, X, Y)
[Tue Apr 10 16:08:32 2012] Not overwriting source region fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 16:08:32 2012] Extracting stamp from image fullrun_mos1_xmm0200980101_pi300-10000_cl_sm2.00.img.gz, (422, 177) - (534, 289)
[Tue Apr 10 16:08:32 2012] XMMSAS bgd. selection expression = annulus(41524.766000, 20197.734000, 3237.640093, 6475.280186, X, Y) && !ellipse(41706.992400, 24180.532000, 1581.684046, 1581.684046, 0.000000, X, Y) && !ellipse(34960.235748, 19978.478912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42709.479220, 25985.912000, 1064.696031, 1064.696031, 0.000000, X, Y) && !ellipse(38518.874857, 21756.720584, 619.949254, 355.255559, 99.824439, X, Y) && !ellipse(39608.034200, 18776.527000, 409.200812, 409.200812, 0.000000, X, Y) && !ellipse(37888.820200, 20764.440800, 407.316012, 407.316012, 0.000000, X, Y) && !ellipse(38974.609600, 25960.281800, 326.813609, 326.813609, 0.000000, X, Y) && !ellipse(42429.281860, 25785.853699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40390.468933, 23096.054138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40643.971130, 18389.887268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37370.816498, 16384.235657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39693.773315, 23285.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42296.254272, 27011.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39088.816925, 25008.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43103.640000, 26898.762000, 1877.368054, 1877.368054, 0.000000, X, Y) && !ellipse(42209.931305, 19209.622253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38584.836609, 17892.705154, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:08:32 2012] Writing fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 16:08:33 2012] ../../xmm0200980101/products/events/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0200980101/products/events/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 16:08:34 2012] Mean detx,y = (14789.97, -5922.98) 
[Tue Apr 10 16:08:34 2012] ../../xmm0200980101/products/images/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0200980101/products/images/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 16:08:34 2012] ../../xmm0200980101/products/spectra/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0200980101/products/spectra/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 16:08:34 2012] Setting source spectrum file to fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:08:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 16:08:34 2012] ../../xmm0200980101/products/lightcurves/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0200980101/products/lightcurves/fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 16:08:41 2012] fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Apr 10 16:08:41 2012] fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 16:10:42 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:10:42 2012] Error reading totcts from fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:10:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:10:43 2012] Using photon index=1.80, rate=0.0394, arf fullrun_mos1_xmm0200980101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 16:10:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:10:43 2012] Updating source flux to 9.9e-13
[Tue Apr 10 16:10:50 2012] Flag b found in src. 2 procflags, skipping spectral fitting